All Packages Class Hierarchy This Package Previous Next Index
Class byucc.jhdl.Xilinx.Virtex.ldpe
java.lang.Object
|
+----byucc.jhdl.base.Nameable
|
+----byucc.jhdl.base.Node
|
+----byucc.jhdl.base.Cell
|
+----byucc.jhdl.base.Structural
|
+----byucc.jhdl.Logic.Logic
|
+----byucc.jhdl.Xilinx.Virtex.ldpe
- public final class ldpe
- extends Logic
- implements PreDefinedSchematic
LDPE is a transparent data latch with asynchronous preset and gate
enable. When the asynchronous preset (PRE) is High, it overrides
the other input and presets the data (Q) output High. Q reflects
the data (D) input while the gate (G) input and gate enable (GE)
are High. If GE is Low, data on D cannot be latched. The data on
the D input during the High-to-Low gate transition is stored in
the latch. The data on the Q output remains unchanged as long as G
or GE remains Low.
The latch is asynchronously preset, output High, when power is
applied. FPGAs simulate power-on when global set/reset (GSR) is
active. GSR defaults to active-High but can be inverted by adding
an inverter in front of the GSR input of the STARTUP,
STARTUP_SPARTAN2, or STARTUP_VIRTEX symbol.
(Source: XACT Libraries Guide, Chapter 7 LDPE, Xilinx Corporation,
1999.)
-
cell_interface
- The port interface for ldpe:
pre: in (1)
ge: in (1)
g: in (1)
d: in (1)
q: out (1)
-
cellname
- The static cellname (netlist reference name) for ldpe
-
ldpe(Node)
- Used only by child classes to pass up the parent cell.
-
ldpe(Node, ArgBlockList)
- Constructs a new ldpe, connecting its ports as given by the
String-Wire pairs in the ArgBlockList.
-
ldpe(Node, String)
- Used only by child classes to pass up the parent cell and instance name.
-
ldpe(Node, String, ArgBlockList)
- Constructs a new ldpe, connecting its ports as given by the
String-Wire pairs in the ArgBlockList, with the initial String parameter as the instance name.
-
ldpe(Node, String, String, Wire, String, Wire, String, Wire, String, Wire, String, Wire)
- Constructs a new ldpe, connecting each
Wire to the port whose name is given by the accompanying String parameter, with the initial String parameter as the instance name.
-
ldpe(Node, String, Wire, String, Wire, String, Wire, String, Wire, String, Wire)
- Constructs a new ldpe, connecting each
Wire to the port whose name is given by the accompanying String parameter.
-
ldpe(Node, String, Wire, Wire, Wire, Wire, Wire)
- Constructs a new ldpe, with the initial
String parameter as the instance name.
-
ldpe(Node, Wire, Wire, Wire, Wire, Wire)
- Constructs a new ldpe.
-
cellInterfaceDeterminesUniqueNetlistStructure()
-
-
clock()
- Performs the synchronous behavior of ldpe.
-
main(String[])
-
-
propagate()
- Performs the asynchronous behavior of ldpe.
-
reset()
- Performs the reset behavior of ldpe.
-
test()
-
-
type()
-
cellname
public static final String cellname
- The static cellname (netlist reference name) for ldpe
cell_interface
public static CellInterface cell_interface[]
- The port interface for ldpe:
pre: in (1)
ge: in (1)
g: in (1)
d: in (1)
q: out (1)
ldpe
protected ldpe(Node parent)
- Used only by child classes to pass up the parent cell.
- Parameters:
- parent - Parent cell
ldpe
protected ldpe(Node parent,
String name)
- Used only by child classes to pass up the parent cell and instance name.
- Parameters:
- parent - Parent cell
- name - Instance name of the cell
ldpe
public ldpe(Node parent,
Wire pre,
Wire ge,
Wire g,
Wire d,
Wire q)
- Constructs a new ldpe.
- Parameters:
- parent - The parent
Cell to the ldpe
- pre - The
Wire to be connected to input port pre
- ge - The
Wire to be connected to input port ge
- g - The
Wire to be connected to input port g
- d - The
Wire to be connected to input port d
- q - The
Wire to be connected to output port q
ldpe
public ldpe(Node parent,
String instanceName,
Wire pre,
Wire ge,
Wire g,
Wire d,
Wire q)
- Constructs a new ldpe, with the initial
String parameter as the instance name.
- Parameters:
- parent - The parent
Cell to the ldpe
- instanceName - The instance name of the ldpe
- pre - The
Wire to be connected to input port pre
- ge - The
Wire to be connected to input port ge
- g - The
Wire to be connected to input port g
- d - The
Wire to be connected to input port d
- q - The
Wire to be connected to output port q
ldpe
public ldpe(Node parent,
String s0,
Wire w0,
String s1,
Wire w1,
String s2,
Wire w2,
String s3,
Wire w3,
String s4,
Wire w4)
- Constructs a new ldpe, connecting each
Wire to the port whose name is given by the accompanying String parameter.
- Parameters:
- parent - The parent
Cell to the ldpe
- s0 - The name of the port to which w0 will be connected
- w0 - The
Wire to be connected to the port specified by s0
- s1 - The name of the port to which w1 will be connected
- w1 - The
Wire to be connected to the port specified by s1
- s2 - The name of the port to which w2 will be connected
- w2 - The
Wire to be connected to the port specified by s2
- s3 - The name of the port to which w3 will be connected
- w3 - The
Wire to be connected to the port specified by s3
- s4 - The name of the port to which w4 will be connected
- w4 - The
Wire to be connected to the port specified by s4
ldpe
public ldpe(Node parent,
String instanceName,
String s0,
Wire w0,
String s1,
Wire w1,
String s2,
Wire w2,
String s3,
Wire w3,
String s4,
Wire w4)
- Constructs a new ldpe, connecting each
Wire to the port whose name is given by the accompanying String parameter, with the initial String parameter as the instance name.
- Parameters:
- parent - The parent
Cell to the ldpe
- instanceName - The instance name of the ldpe
- s0 - The name of the port to which w0 will be connected
- w0 - The
Wire to be connected to the port specified by s0
- s1 - The name of the port to which w1 will be connected
- w1 - The
Wire to be connected to the port specified by s1
- s2 - The name of the port to which w2 will be connected
- w2 - The
Wire to be connected to the port specified by s2
- s3 - The name of the port to which w3 will be connected
- w3 - The
Wire to be connected to the port specified by s3
- s4 - The name of the port to which w4 will be connected
- w4 - The
Wire to be connected to the port specified by s4
ldpe
public ldpe(Node parent,
ArgBlockList abl)
- Constructs a new ldpe, connecting its ports as given by the
String-Wire pairs in the ArgBlockList. Any generic assignments are made through String-String pairs in the ArgBlockList.
- Parameters:
- parent - The parent
Cell to the ldpe
- abl - The list of
String-Wire pairs for port assignments, and String-String pairs for generic assignments.
ldpe
public ldpe(Node parent,
String instanceName,
ArgBlockList abl)
- Constructs a new ldpe, connecting its ports as given by the
String-Wire pairs in the ArgBlockList, with the initial String parameter as the instance name. Any generic assignments are made through String-String pairs in the ArgBlockList.
- Parameters:
- parent - The parent
Cell to the ldpe
- instanceName - The instance name of the ldpe
- abl - The list of
String-Wire pairs for port assignments, and String-String pairs for generic assignments.
clock
public final void clock()
- Performs the synchronous behavior of ldpe.
- Overrides:
- clock in class Structural
reset
public void reset()
- Performs the reset behavior of ldpe. Reset state is defined as:
- Overrides:
- reset in class Structural
propagate
public final void propagate()
- Performs the asynchronous behavior of ldpe.
- Overrides:
- propagate in class Structural
cellInterfaceDeterminesUniqueNetlistStructure
public final boolean cellInterfaceDeterminesUniqueNetlistStructure()
- Overrides:
- cellInterfaceDeterminesUniqueNetlistStructure in class Cell
type
public int type()
main
public static void main(String argv[])
test
public static void test()
All Packages Class Hierarchy This Package Previous Next Index