All Packages Class Hierarchy This Package Previous Next Index
Class byucc.jhdl.Xilinx.Virtex.obuft_sstl2_ii
java.lang.Object
|
+----byucc.jhdl.base.Nameable
|
+----byucc.jhdl.base.Node
|
+----byucc.jhdl.base.Cell
|
+----byucc.jhdl.base.CL
|
+----byucc.jhdl.Xilinx.Virtex.obuft_sstl2_ii
- public final class obuft_sstl2_ii
- extends CL
- implements UnmappableCell, PreDefinedSchematic
OBUFT and its variants (listed below) are single 3-state output
buffers with active-Low output Enable whose I/O interface
corresponds to a specific I/O standard. The name extensions
(LVCMOS2, PCI33_3, PCI33_5, etc.) specify the standard. The S, F,
and 2, 4, 6, 8, 12, 16, 24 extensions specify the slew rate (SLOW
or FAST) and the drive power (2, 4, 6, 8, 12, 16, 24 mA) for the
LVTTL standard. For example, OBUFT_S_4 is a 3-state output buffer
with active-Low output enable that uses the LVTTL I/O signaling
standard with a SLOW slew and 4mA of drive power.
OBUFT has selectable drive and slew rates using the DRIVE and FAST
or SLOW constraints. The defaults are DRIVE=12 mA and SLOW slew.
When T is Low, data on the input of the buffer is transferred to
the output. When T is High, the output is high impedance (off or Z
state). OBUFTs isolate the internal circuit and provide extra
drive current for signals leaving a chip. An OBUFT output is
connected to an OPAD or an IOPAD.
The hardware implementation of the I/O standards requires that you
follow a set of usage rules for the SelectI/O buffer
components. Refer to the \"SelectI/O Usage Rules\" section under the
IBUF_selectIO section for information on using these components.
(Source: XACT Libraries Guide, Chapter 8 OBUFT_selectIO, Xilinx Corporation,
1999.)
-
cell_interface
- The port interface for obuft_sstl2_ii:
i: in (1)
t: in (1)
o: out (1)
-
cellname
- The static cellname (netlist reference name) for obuft_sstl2_ii
-
obuft_sstl2_ii(Node)
- Used only by child classes to pass up the parent cell.
-
obuft_sstl2_ii(Node, ArgBlockList)
- Constructs a new obuft_sstl2_ii, connecting its ports as given by the
String-Wire pairs in the ArgBlockList.
-
obuft_sstl2_ii(Node, String)
- Used only by child classes to pass up the parent cell and instance name.
-
obuft_sstl2_ii(Node, String, ArgBlockList)
- Constructs a new obuft_sstl2_ii, connecting its ports as given by the
String-Wire pairs in the ArgBlockList, with the initial String parameter as the instance name.
-
obuft_sstl2_ii(Node, String, String, Wire, String, Wire, String, Wire)
- Constructs a new obuft_sstl2_ii, connecting each
Wire to the port whose name is given by the accompanying String parameter, with the initial String parameter as the instance name.
-
obuft_sstl2_ii(Node, String, Wire, String, Wire, String, Wire)
- Constructs a new obuft_sstl2_ii, connecting each
Wire to the port whose name is given by the accompanying String parameter.
-
obuft_sstl2_ii(Node, String, Wire, Wire, Wire)
- Constructs a new obuft_sstl2_ii, with the initial
String parameter as the instance name.
-
obuft_sstl2_ii(Node, Wire, Wire, Wire)
- Constructs a new obuft_sstl2_ii.
-
cellInterfaceDeterminesUniqueNetlistStructure()
-
-
main(String[])
-
-
propagate()
- Performs the asynchronous behavior of obuft_sstl2_ii.
-
test()
-
-
type()
-
cellname
public static final String cellname
- The static cellname (netlist reference name) for obuft_sstl2_ii
cell_interface
public static CellInterface cell_interface[]
- The port interface for obuft_sstl2_ii:
i: in (1)
t: in (1)
o: out (1)
obuft_sstl2_ii
protected obuft_sstl2_ii(Node parent)
- Used only by child classes to pass up the parent cell.
- Parameters:
- parent - Parent cell
obuft_sstl2_ii
protected obuft_sstl2_ii(Node parent,
String name)
- Used only by child classes to pass up the parent cell and instance name.
- Parameters:
- parent - Parent cell
- name - Instance name of the cell
obuft_sstl2_ii
public obuft_sstl2_ii(Node parent,
Wire i,
Wire t,
Wire o)
- Constructs a new obuft_sstl2_ii.
- Parameters:
- parent - The parent
Cell to the obuft_sstl2_ii
- i - The
Wire to be connected to input port i
- t - The
Wire to be connected to input port t
- o - The
Wire to be connected to output port o
obuft_sstl2_ii
public obuft_sstl2_ii(Node parent,
String instanceName,
Wire i,
Wire t,
Wire o)
- Constructs a new obuft_sstl2_ii, with the initial
String parameter as the instance name.
- Parameters:
- parent - The parent
Cell to the obuft_sstl2_ii
- instanceName - The instance name of the obuft_sstl2_ii
- i - The
Wire to be connected to input port i
- t - The
Wire to be connected to input port t
- o - The
Wire to be connected to output port o
obuft_sstl2_ii
public obuft_sstl2_ii(Node parent,
String s0,
Wire w0,
String s1,
Wire w1,
String s2,
Wire w2)
- Constructs a new obuft_sstl2_ii, connecting each
Wire to the port whose name is given by the accompanying String parameter.
- Parameters:
- parent - The parent
Cell to the obuft_sstl2_ii
- s0 - The name of the port to which w0 will be connected
- w0 - The
Wire to be connected to the port specified by s0
- s1 - The name of the port to which w1 will be connected
- w1 - The
Wire to be connected to the port specified by s1
- s2 - The name of the port to which w2 will be connected
- w2 - The
Wire to be connected to the port specified by s2
obuft_sstl2_ii
public obuft_sstl2_ii(Node parent,
String instanceName,
String s0,
Wire w0,
String s1,
Wire w1,
String s2,
Wire w2)
- Constructs a new obuft_sstl2_ii, connecting each
Wire to the port whose name is given by the accompanying String parameter, with the initial String parameter as the instance name.
- Parameters:
- parent - The parent
Cell to the obuft_sstl2_ii
- instanceName - The instance name of the obuft_sstl2_ii
- s0 - The name of the port to which w0 will be connected
- w0 - The
Wire to be connected to the port specified by s0
- s1 - The name of the port to which w1 will be connected
- w1 - The
Wire to be connected to the port specified by s1
- s2 - The name of the port to which w2 will be connected
- w2 - The
Wire to be connected to the port specified by s2
obuft_sstl2_ii
public obuft_sstl2_ii(Node parent,
ArgBlockList abl)
- Constructs a new obuft_sstl2_ii, connecting its ports as given by the
String-Wire pairs in the ArgBlockList. Any generic assignments are made through String-String pairs in the ArgBlockList.
- Parameters:
- parent - The parent
Cell to the obuft_sstl2_ii
- abl - The list of
String-Wire pairs for port assignments, and String-String pairs for generic assignments.
obuft_sstl2_ii
public obuft_sstl2_ii(Node parent,
String instanceName,
ArgBlockList abl)
- Constructs a new obuft_sstl2_ii, connecting its ports as given by the
String-Wire pairs in the ArgBlockList, with the initial String parameter as the instance name. Any generic assignments are made through String-String pairs in the ArgBlockList.
- Parameters:
- parent - The parent
Cell to the obuft_sstl2_ii
- instanceName - The instance name of the obuft_sstl2_ii
- abl - The list of
String-Wire pairs for port assignments, and String-String pairs for generic assignments.
propagate
public final void propagate()
- Performs the asynchronous behavior of obuft_sstl2_ii.
- Overrides:
- propagate in class CL
cellInterfaceDeterminesUniqueNetlistStructure
public final boolean cellInterfaceDeterminesUniqueNetlistStructure()
- Overrides:
- cellInterfaceDeterminesUniqueNetlistStructure in class CL
type
public int type()
main
public static void main(String argv[])
test
public static void test()
All Packages Class Hierarchy This Package Previous Next Index