All Packages  Class Hierarchy  This Package  Previous  Next  Index

Class byucc.jhdl.Xilinx.XC4000.bscan

java.lang.Object
   |
   +----byucc.jhdl.base.Nameable
           |
           +----byucc.jhdl.base.Node
                   |
                   +----byucc.jhdl.base.Cell
                           |
                           +----byucc.jhdl.base.Annotation
                                   |
                                   +----byucc.jhdl.Xilinx.XC4000.bscan

public final class bscan
extends Annotation
implements PreDefinedSchematic
The BSCAN symbol indicates that boundary scan logic should be enabled after the programmable logic device (PLD) configuration is complete. It also provides optional access to some special features of the XC5200 boundary scan logic. Note: For specific information on boundary scan for each architecture, refer to The Programmable Logic Data Book. To indicate that boundary scan remains enabled after configuration, connect the BSCAN symbol to the TDI, TMS, TCK, and TDO pads. The other pins on BSCAN do not need to be connected, unless those special functions are needed. A signal on the TDO1 input is passed to the external TDO output when the USER1 instruction is executed; the SEL1 output goes High to indicate that the USER1 instruction is active. The TDO2 and SEL2 pins perform a similar function for the USER2 instruction. The DRCK output provides access to the data register clock (generated by the TAP controller). The IDLE output provides access to a version of the TCK input, which is only active while the TAP controller is in the Run-Test-Idle state. The RESET, UPDATE, and SHIFT pins of the XC5200 BSCAN symbol represent the decoding of the corresponding state of the boundary scan internal state machine. These functions are not available in the XC4000E, XC4000X, Spartan, and SpartanXL. If boundary scan is used only before configuration is complete, do not include the BSCAN symbol in the design. The TDI, TMS, TCK, and TDO pins can be reserved for user functions. (Source: XACT Libraries Guide, Chapter 3 BSCAN, Xilinx Corporation, 1999.)


Variable Index

 o cell_interface
The port interface for bscan: tdi: in (1) tms: in (1) tck: in (1) tdo1: in (1) tdo2: in (1) tdo: out (1) drck: out (1) idle: out (1) sel1: out (1) sel2: out (1)
 o cellname
The static cellname (netlist reference name) for bscan

Constructor Index

 o bscan(Node)
Used only by child classes to pass up the parent cell.
 o bscan(Node, ArgBlockList)
Constructs a new bscan, connecting its ports as given by the String-Wire pairs in the ArgBlockList.
 o bscan(Node, String)
Used only by child classes to pass up the parent cell and instance name.
 o bscan(Node, String, ArgBlockList)
Constructs a new bscan, connecting its ports as given by the String-Wire pairs in the ArgBlockList, with the initial String parameter as the instance name.
 o bscan(Node, String, String, Wire, String, Wire, String, Wire, String, Wire, String, Wire, String, Wire, String, Wire, String, Wire, String, Wire, String, Wire)
Constructs a new bscan, connecting each Wire to the port whose name is given by the accompanying String parameter, with the initial String parameter as the instance name.
 o bscan(Node, String, Wire, String, Wire, String, Wire, String, Wire, String, Wire, String, Wire, String, Wire, String, Wire, String, Wire, String, Wire)
Constructs a new bscan, connecting each Wire to the port whose name is given by the accompanying String parameter.
 o bscan(Node, String, Wire, Wire, Wire, Wire, Wire, Wire, Wire, Wire, Wire, Wire)
Constructs a new bscan, with the initial String parameter as the instance name.
 o bscan(Node, Wire, Wire, Wire, Wire, Wire, Wire, Wire, Wire, Wire, Wire)
Constructs a new bscan.

Method Index

 o cellInterfaceDeterminesUniqueNetlistStructure()
 o main(String[])
 o test()
 o type()

Variables

 o cellname
 public static final String cellname
The static cellname (netlist reference name) for bscan

 o cell_interface
 public static CellInterface cell_interface[]
The port interface for bscan: tdi: in (1) tms: in (1) tck: in (1) tdo1: in (1) tdo2: in (1) tdo: out (1) drck: out (1) idle: out (1) sel1: out (1) sel2: out (1)

Constructors

 o bscan
 protected bscan(Node parent)
Used only by child classes to pass up the parent cell.

Parameters:
parent - Parent cell
 o bscan
 protected bscan(Node parent,
                 String name)
Used only by child classes to pass up the parent cell and instance name.

Parameters:
parent - Parent cell
name - Instance name of the cell
 o bscan
 public bscan(Node parent,
              Wire tdi,
              Wire tms,
              Wire tck,
              Wire tdo1,
              Wire tdo2,
              Wire tdo,
              Wire drck,
              Wire idle,
              Wire sel1,
              Wire sel2)
Constructs a new bscan.

Parameters:
parent - The parent Cell to the bscan
tdi - The Wire to be connected to input port tdi
tms - The Wire to be connected to input port tms
tck - The Wire to be connected to input port tck
tdo1 - The Wire to be connected to input port tdo1
tdo2 - The Wire to be connected to input port tdo2
tdo - The Wire to be connected to output port tdo
drck - The Wire to be connected to output port drck
idle - The Wire to be connected to output port idle
sel1 - The Wire to be connected to output port sel1
sel2 - The Wire to be connected to output port sel2
 o bscan
 public bscan(Node parent,
              String instanceName,
              Wire tdi,
              Wire tms,
              Wire tck,
              Wire tdo1,
              Wire tdo2,
              Wire tdo,
              Wire drck,
              Wire idle,
              Wire sel1,
              Wire sel2)
Constructs a new bscan, with the initial String parameter as the instance name.

Parameters:
parent - The parent Cell to the bscan
instanceName - The instance name of the bscan
tdi - The Wire to be connected to input port tdi
tms - The Wire to be connected to input port tms
tck - The Wire to be connected to input port tck
tdo1 - The Wire to be connected to input port tdo1
tdo2 - The Wire to be connected to input port tdo2
tdo - The Wire to be connected to output port tdo
drck - The Wire to be connected to output port drck
idle - The Wire to be connected to output port idle
sel1 - The Wire to be connected to output port sel1
sel2 - The Wire to be connected to output port sel2
 o bscan
 public bscan(Node parent,
              String s0,
              Wire w0,
              String s1,
              Wire w1,
              String s2,
              Wire w2,
              String s3,
              Wire w3,
              String s4,
              Wire w4,
              String s5,
              Wire w5,
              String s6,
              Wire w6,
              String s7,
              Wire w7,
              String s8,
              Wire w8,
              String s9,
              Wire w9)
Constructs a new bscan, connecting each Wire to the port whose name is given by the accompanying String parameter.

Parameters:
parent - The parent Cell to the bscan
s0 - The name of the port to which w0 will be connected
w0 - The Wire to be connected to the port specified by s0
s1 - The name of the port to which w1 will be connected
w1 - The Wire to be connected to the port specified by s1
s2 - The name of the port to which w2 will be connected
w2 - The Wire to be connected to the port specified by s2
s3 - The name of the port to which w3 will be connected
w3 - The Wire to be connected to the port specified by s3
s4 - The name of the port to which w4 will be connected
w4 - The Wire to be connected to the port specified by s4
s5 - The name of the port to which w5 will be connected
w5 - The Wire to be connected to the port specified by s5
s6 - The name of the port to which w6 will be connected
w6 - The Wire to be connected to the port specified by s6
s7 - The name of the port to which w7 will be connected
w7 - The Wire to be connected to the port specified by s7
s8 - The name of the port to which w8 will be connected
w8 - The Wire to be connected to the port specified by s8
s9 - The name of the port to which w9 will be connected
w9 - The Wire to be connected to the port specified by s9
 o bscan
 public bscan(Node parent,
              String instanceName,
              String s0,
              Wire w0,
              String s1,
              Wire w1,
              String s2,
              Wire w2,
              String s3,
              Wire w3,
              String s4,
              Wire w4,
              String s5,
              Wire w5,
              String s6,
              Wire w6,
              String s7,
              Wire w7,
              String s8,
              Wire w8,
              String s9,
              Wire w9)
Constructs a new bscan, connecting each Wire to the port whose name is given by the accompanying String parameter, with the initial String parameter as the instance name.

Parameters:
parent - The parent Cell to the bscan
instanceName - The instance name of the bscan
s0 - The name of the port to which w0 will be connected
w0 - The Wire to be connected to the port specified by s0
s1 - The name of the port to which w1 will be connected
w1 - The Wire to be connected to the port specified by s1
s2 - The name of the port to which w2 will be connected
w2 - The Wire to be connected to the port specified by s2
s3 - The name of the port to which w3 will be connected
w3 - The Wire to be connected to the port specified by s3
s4 - The name of the port to which w4 will be connected
w4 - The Wire to be connected to the port specified by s4
s5 - The name of the port to which w5 will be connected
w5 - The Wire to be connected to the port specified by s5
s6 - The name of the port to which w6 will be connected
w6 - The Wire to be connected to the port specified by s6
s7 - The name of the port to which w7 will be connected
w7 - The Wire to be connected to the port specified by s7
s8 - The name of the port to which w8 will be connected
w8 - The Wire to be connected to the port specified by s8
s9 - The name of the port to which w9 will be connected
w9 - The Wire to be connected to the port specified by s9
 o bscan
 public bscan(Node parent,
              ArgBlockList abl)
Constructs a new bscan, connecting its ports as given by the String-Wire pairs in the ArgBlockList. Any generic assignments are made through String-String pairs in the ArgBlockList.

Parameters:
parent - The parent Cell to the bscan
abl - The list of String-Wire pairs for port assignments, and String-String pairs for generic assignments.
 o bscan
 public bscan(Node parent,
              String instanceName,
              ArgBlockList abl)
Constructs a new bscan, connecting its ports as given by the String-Wire pairs in the ArgBlockList, with the initial String parameter as the instance name. Any generic assignments are made through String-String pairs in the ArgBlockList.

Parameters:
parent - The parent Cell to the bscan
instanceName - The instance name of the bscan
abl - The list of String-Wire pairs for port assignments, and String-String pairs for generic assignments.

Methods

 o cellInterfaceDeterminesUniqueNetlistStructure
 public final boolean cellInterfaceDeterminesUniqueNetlistStructure()
Overrides:
cellInterfaceDeterminesUniqueNetlistStructure in class Cell
 o type
 public int type()
 o main
 public static void main(String argv[])
 o test
 public static void test()

All Packages  Class Hierarchy  This Package  Previous  Next  Index