All Packages  Class Hierarchy  This Package  Previous  Next  Index

Class byucc.jhdl.Xilinx.XC4000.bufgs

java.lang.Object
   |
   +----byucc.jhdl.base.Nameable
           |
           +----byucc.jhdl.base.Node
                   |
                   +----byucc.jhdl.base.Cell
                           |
                           +----byucc.jhdl.base.CL
                                   |
                                   +----byucc.jhdl.Xilinx.XC4000.bufgs

public final class bufgs
extends CL
implements UnmappableCell, PreDefinedSchematic
BUFGS, a secondary global buffer, distributes high fan-out clock or control signals throughout a PLD device. In CPLD designs, BUFGS is treated like BUFG. BUFGS provides direct access to Configurable Logic Block (CLB) clock pins and limited access to other CLB inputs. Four BUFGSs are available on each XC4000E and Spartan device, one in each corner. The input to a BUFGS comes either from a dedicated Input Output Block (IOB) or from an internal signal. Alongside each column of CLBs in an XC4000E or Spartan device are four global vertical lines, which are in addition to the standard vertical longlines. Each one of the four global vertical lines can drive the CLB clock (K) pin directly. In addition, one of the four lines can drive the F3 pin, a second line can drive the G1 pin, a third can drive the C3 pin, and a fourth can drive the C1 pin. Each of the four BUFGSs can drive any of these global vertical lines and are also used as the primary global buffers (refer also to the \"BUFGP\" section for more information). Because of its structure, a BUFGS can always access a clock pin directly. Because the BUFGS is more flexible than the BUFGP, it can use additional global vertical lines to access the F3, G1, C3, and C1 pins but requires multiple vertical lines in the same column. If the vertical lines in a given column are already used for BUFGPs or another BUFGS, PAR might have to feed signals through other CLBs to reach the load pins. To use a BUFGS in a schematic, connect the input of the BUFGS element either directly to the PAD symbol (for an external input) or to an internally sourced net. For an external signal, do not use any IBUFs, because the signal comes directly from the dedicated IOB. The output of the BUFGS is then used throughout the schematic. For a negative-edge clock, insert an INV (inverter) element between the output of the BUFGS and the clock input. This inversion is performed inside each CLB or IOB. The dedicated inputs for BUFGSs are identified by the names SGCK1 through SGCK4 in pinouts in XC4000E and Spartan. The package pin that drives the BUFGS depends on which corner the BUFGS is placed by PAR. (Source: XACT Libraries Guide, Chapter 3 BUFGS, Xilinx Corporation, 1999.) (Note for use with XC4000E only)


Variable Index

 o cell_interface
The port interface for bufgs: i: in (1) o: out (1)
 o cellname
The static cellname (netlist reference name) for bufgs

Constructor Index

 o bufgs(Node)
Used only by child classes to pass up the parent cell.
 o bufgs(Node, ArgBlockList)
Constructs a new bufgs, connecting its ports as given by the String-Wire pairs in the ArgBlockList.
 o bufgs(Node, String)
Used only by child classes to pass up the parent cell and instance name.
 o bufgs(Node, String, ArgBlockList)
Constructs a new bufgs, connecting its ports as given by the String-Wire pairs in the ArgBlockList, with the initial String parameter as the instance name.
 o bufgs(Node, String, String, Wire, String, Wire)
Constructs a new bufgs, connecting each Wire to the port whose name is given by the accompanying String parameter, with the initial String parameter as the instance name.
 o bufgs(Node, String, Wire, String, Wire)
Constructs a new bufgs, connecting each Wire to the port whose name is given by the accompanying String parameter.
 o bufgs(Node, String, Wire, Wire)
Constructs a new bufgs, with the initial String parameter as the instance name.
 o bufgs(Node, Wire, Wire)
Constructs a new bufgs.

Method Index

 o cellInterfaceDeterminesUniqueNetlistStructure()
 o main(String[])
 o propagate()
Performs the asynchronous behavior of bufgs.
 o test()
 o type()

Variables

 o cellname
 public static final String cellname
The static cellname (netlist reference name) for bufgs

 o cell_interface
 public static CellInterface cell_interface[]
The port interface for bufgs: i: in (1) o: out (1)

Constructors

 o bufgs
 protected bufgs(Node parent)
Used only by child classes to pass up the parent cell.

Parameters:
parent - Parent cell
 o bufgs
 protected bufgs(Node parent,
                 String name)
Used only by child classes to pass up the parent cell and instance name.

Parameters:
parent - Parent cell
name - Instance name of the cell
 o bufgs
 public bufgs(Node parent,
              Wire i,
              Wire o)
Constructs a new bufgs.

Parameters:
parent - The parent Cell to the bufgs
i - The Wire to be connected to input port i
o - The Wire to be connected to output port o
 o bufgs
 public bufgs(Node parent,
              String instanceName,
              Wire i,
              Wire o)
Constructs a new bufgs, with the initial String parameter as the instance name.

Parameters:
parent - The parent Cell to the bufgs
instanceName - The instance name of the bufgs
i - The Wire to be connected to input port i
o - The Wire to be connected to output port o
 o bufgs
 public bufgs(Node parent,
              String s0,
              Wire w0,
              String s1,
              Wire w1)
Constructs a new bufgs, connecting each Wire to the port whose name is given by the accompanying String parameter.

Parameters:
parent - The parent Cell to the bufgs
s0 - The name of the port to which w0 will be connected
w0 - The Wire to be connected to the port specified by s0
s1 - The name of the port to which w1 will be connected
w1 - The Wire to be connected to the port specified by s1
 o bufgs
 public bufgs(Node parent,
              String instanceName,
              String s0,
              Wire w0,
              String s1,
              Wire w1)
Constructs a new bufgs, connecting each Wire to the port whose name is given by the accompanying String parameter, with the initial String parameter as the instance name.

Parameters:
parent - The parent Cell to the bufgs
instanceName - The instance name of the bufgs
s0 - The name of the port to which w0 will be connected
w0 - The Wire to be connected to the port specified by s0
s1 - The name of the port to which w1 will be connected
w1 - The Wire to be connected to the port specified by s1
 o bufgs
 public bufgs(Node parent,
              ArgBlockList abl)
Constructs a new bufgs, connecting its ports as given by the String-Wire pairs in the ArgBlockList. Any generic assignments are made through String-String pairs in the ArgBlockList.

Parameters:
parent - The parent Cell to the bufgs
abl - The list of String-Wire pairs for port assignments, and String-String pairs for generic assignments.
 o bufgs
 public bufgs(Node parent,
              String instanceName,
              ArgBlockList abl)
Constructs a new bufgs, connecting its ports as given by the String-Wire pairs in the ArgBlockList, with the initial String parameter as the instance name. Any generic assignments are made through String-String pairs in the ArgBlockList.

Parameters:
parent - The parent Cell to the bufgs
instanceName - The instance name of the bufgs
abl - The list of String-Wire pairs for port assignments, and String-String pairs for generic assignments.

Methods

 o cellInterfaceDeterminesUniqueNetlistStructure
 public final boolean cellInterfaceDeterminesUniqueNetlistStructure()
Overrides:
cellInterfaceDeterminesUniqueNetlistStructure in class CL
 o propagate
 public final void propagate()
Performs the asynchronous behavior of bufgs.

Overrides:
propagate in class CL
 o type
 public int type()
 o main
 public static void main(String argv[])
 o test
 public static void test()

All Packages  Class Hierarchy  This Package  Previous  Next  Index