All Packages  Class Hierarchy  This Package  Previous  Next  Index

Class byucc.jhdl.Xilinx.Virtex.bufe

java.lang.Object
   |
   +----byucc.jhdl.base.Nameable
           |
           +----byucc.jhdl.base.Node
                   |
                   +----byucc.jhdl.base.Cell
                           |
                           +----byucc.jhdl.base.CL
                                   |
                                   +----byucc.jhdl.base.TriStateDriver
                                           |
                                           +----byucc.jhdl.Xilinx.Virtex.bufe

public final class bufe
extends TriStateDriver
implements UnmappableCell, PreDefinedSchematic
BUFE, BUFE4, BUFE8, and BUFE16 are single or multiple tristate buffers with inputs I, I3 - I0, I7 - I0, and I15 - I0, respectively; outputs O, O3 - O0, O7 - O0, and O15 - O0, respectively; and active-High output enable (E). When E is High, data on the inputs of the buffers is transferred to the corresponding outputs. When E is Low, the output is high impedance (Z state or Off). The outputs of the buffers are connected to horizontal longlines in FPGA architectures. The outputs of separate BUFE symbols can be tied together to form a bus or a multiplexer. Make sure that only one E is High at any one time. If none of the E inputs is active-High, a \"weak-keeper\" circuit (FPGAs) keeps the output bus from floating but does not guarantee that the bus remains at the last value driven onto it. In XC3000, XC4000E, XC4000X, Spartan, and SpartanXL, the E signal in BUFE macros is implemented by using a BUFT with an inverter on the active-Low enable (T) pin. This inverter can add an extra level of logic to the data path. Pull-up resistors can be used to establish a High logic level if all BUFE elements are Off. For Virtex and Spartan2, BUFE elements need a PULLUP element connected to their output. NGDBuild inserts a PULLUP element if one is not connected. (Source: XACT Libraries Guide, Chapter 3 BUFE, Xilinx Corporation, 1999.)


Variable Index

 o cell_interface
The port interface for bufe: i: in (1) e: in (1) o: out (1)
 o cellname
The static cellname (netlist reference name) for bufe

Constructor Index

 o bufe(Node)
Used only by child classes to pass up the parent cell.
 o bufe(Node, ArgBlockList)
Constructs a new bufe, connecting its ports as given by the String-Wire pairs in the ArgBlockList.
 o bufe(Node, String)
Used only by child classes to pass up the parent cell and instance name.
 o bufe(Node, String, ArgBlockList)
Constructs a new bufe, connecting its ports as given by the String-Wire pairs in the ArgBlockList, with the initial String parameter as the instance name.
 o bufe(Node, String, String, Wire, String, Wire, String, Wire)
Constructs a new bufe, connecting each Wire to the port whose name is given by the accompanying String parameter, with the initial String parameter as the instance name.
 o bufe(Node, String, Wire, String, Wire, String, Wire)
Constructs a new bufe, connecting each Wire to the port whose name is given by the accompanying String parameter.
 o bufe(Node, String, Wire, Wire, Wire)
Constructs a new bufe, with the initial String parameter as the instance name.
 o bufe(Node, Wire, Wire, Wire)
Constructs a new bufe.

Method Index

 o cellInterfaceDeterminesUniqueNetlistStructure()
 o main(String[])
 o propagate()
Performs the asynchronous behavior of bufe.
 o test()
 o type()

Variables

 o cellname
 public static final String cellname
The static cellname (netlist reference name) for bufe

 o cell_interface
 public static CellInterface cell_interface[]
The port interface for bufe: i: in (1) e: in (1) o: out (1)

Constructors

 o bufe
 protected bufe(Node parent)
Used only by child classes to pass up the parent cell.

Parameters:
parent - Parent cell
 o bufe
 protected bufe(Node parent,
                String name)
Used only by child classes to pass up the parent cell and instance name.

Parameters:
parent - Parent cell
name - Instance name of the cell
 o bufe
 public bufe(Node parent,
             Wire i,
             Wire e,
             Wire o)
Constructs a new bufe.

Parameters:
parent - The parent Cell to the bufe
i - The Wire to be connected to input port i
e - The Wire to be connected to input port e
o - The Wire to be connected to output port o
 o bufe
 public bufe(Node parent,
             String instanceName,
             Wire i,
             Wire e,
             Wire o)
Constructs a new bufe, with the initial String parameter as the instance name.

Parameters:
parent - The parent Cell to the bufe
instanceName - The instance name of the bufe
i - The Wire to be connected to input port i
e - The Wire to be connected to input port e
o - The Wire to be connected to output port o
 o bufe
 public bufe(Node parent,
             String s0,
             Wire w0,
             String s1,
             Wire w1,
             String s2,
             Wire w2)
Constructs a new bufe, connecting each Wire to the port whose name is given by the accompanying String parameter.

Parameters:
parent - The parent Cell to the bufe
s0 - The name of the port to which w0 will be connected
w0 - The Wire to be connected to the port specified by s0
s1 - The name of the port to which w1 will be connected
w1 - The Wire to be connected to the port specified by s1
s2 - The name of the port to which w2 will be connected
w2 - The Wire to be connected to the port specified by s2
 o bufe
 public bufe(Node parent,
             String instanceName,
             String s0,
             Wire w0,
             String s1,
             Wire w1,
             String s2,
             Wire w2)
Constructs a new bufe, connecting each Wire to the port whose name is given by the accompanying String parameter, with the initial String parameter as the instance name.

Parameters:
parent - The parent Cell to the bufe
instanceName - The instance name of the bufe
s0 - The name of the port to which w0 will be connected
w0 - The Wire to be connected to the port specified by s0
s1 - The name of the port to which w1 will be connected
w1 - The Wire to be connected to the port specified by s1
s2 - The name of the port to which w2 will be connected
w2 - The Wire to be connected to the port specified by s2
 o bufe
 public bufe(Node parent,
             ArgBlockList abl)
Constructs a new bufe, connecting its ports as given by the String-Wire pairs in the ArgBlockList. Any generic assignments are made through String-String pairs in the ArgBlockList.

Parameters:
parent - The parent Cell to the bufe
abl - The list of String-Wire pairs for port assignments, and String-String pairs for generic assignments.
 o bufe
 public bufe(Node parent,
             String instanceName,
             ArgBlockList abl)
Constructs a new bufe, connecting its ports as given by the String-Wire pairs in the ArgBlockList, with the initial String parameter as the instance name. Any generic assignments are made through String-String pairs in the ArgBlockList.

Parameters:
parent - The parent Cell to the bufe
instanceName - The instance name of the bufe
abl - The list of String-Wire pairs for port assignments, and String-String pairs for generic assignments.

Methods

 o cellInterfaceDeterminesUniqueNetlistStructure
 public final boolean cellInterfaceDeterminesUniqueNetlistStructure()
Overrides:
cellInterfaceDeterminesUniqueNetlistStructure in class CL
 o propagate
 public final void propagate()
Performs the asynchronous behavior of bufe.

Overrides:
propagate in class CL
 o type
 public int type()
 o main
 public static void main(String argv[])
 o test
 public static void test()

All Packages  Class Hierarchy  This Package  Previous  Next  Index