All Packages Class Hierarchy This Package Previous Next Index
Class byucc.jhdl.Xilinx.Virtex.d3_8e
java.lang.Object
|
+----byucc.jhdl.base.Nameable
|
+----byucc.jhdl.base.Node
|
+----byucc.jhdl.base.Cell
|
+----byucc.jhdl.base.Structural
|
+----byucc.jhdl.Logic.Logic
|
+----byucc.jhdl.Xilinx.Virtex.d3_8e
- public final class d3_8e
- extends Logic
- implements PreDefinedSchematic
The d3_8e class implements an enabled 3:8 decoder. When the enable
(EN) pin is asserted, one of the eight active-high outputs (D7-D0)
is selected with a 3-bit binary address (A2-A0) as input. The
non-selected outputs are low. Also, when EN is low, all outputs
are low.
(Source: XACT Libraries Guide, pg. 3-228, Xilinx Corporation,
1994.)
-
cell_interface
- The port interface for d3_8e:
a0: in (1)
a1: in (1)
a2: in (1)
e: in (1)
d0: out (1)
d1: out (1)
d2: out (1)
d3: out (1)
d4: out (1)
d5: out (1)
d6: out (1)
d7: out (1)
-
cellname
- The static cellname (netlist reference name) for d3_8e
-
d3_8e(Node)
- Used only by child classes to pass up the parent cell.
-
d3_8e(Node, ArgBlockList)
- Constructs a new d3_8e, connecting its ports as given by the
String-Wire pairs in the ArgBlockList.
-
d3_8e(Node, String)
- Used only by child classes to pass up the parent cell and instance name.
-
d3_8e(Node, String, ArgBlockList)
- Constructs a new d3_8e, connecting its ports as given by the
String-Wire pairs in the ArgBlockList, with the initial String parameter as the instance name.
-
d3_8e(Node, String, String, Wire, String, Wire, String, Wire, String, Wire, String, Wire, String, Wire, String, Wire, String, Wire, String, Wire, String, Wire, String, Wire, String, Wire)
- Constructs a new d3_8e, connecting each
Wire to the port whose name is given by the accompanying String parameter, with the initial String parameter as the instance name.
-
d3_8e(Node, String, Wire, String, Wire, String, Wire, String, Wire, String, Wire, String, Wire, String, Wire, String, Wire, String, Wire, String, Wire, String, Wire, String, Wire)
- Constructs a new d3_8e, connecting each
Wire to the port whose name is given by the accompanying String parameter.
-
d3_8e(Node, String, Wire, Wire, Wire, Wire, Wire, Wire, Wire, Wire, Wire, Wire, Wire, Wire)
- Constructs a new d3_8e, with the initial
String parameter as the instance name.
-
d3_8e(Node, Wire, Wire, Wire, Wire, Wire, Wire, Wire, Wire, Wire, Wire, Wire, Wire)
- Constructs a new d3_8e.
-
cellInterfaceDeterminesUniqueNetlistStructure()
-
-
main(String[])
-
-
test()
-
-
type()
-
cellname
public static final String cellname
- The static cellname (netlist reference name) for d3_8e
cell_interface
public static CellInterface cell_interface[]
- The port interface for d3_8e:
a0: in (1)
a1: in (1)
a2: in (1)
e: in (1)
d0: out (1)
d1: out (1)
d2: out (1)
d3: out (1)
d4: out (1)
d5: out (1)
d6: out (1)
d7: out (1)
d3_8e
protected d3_8e(Node parent)
- Used only by child classes to pass up the parent cell.
- Parameters:
- parent - Parent cell
d3_8e
protected d3_8e(Node parent,
String name)
- Used only by child classes to pass up the parent cell and instance name.
- Parameters:
- parent - Parent cell
- name - Instance name of the cell
d3_8e
public d3_8e(Node parent,
Wire a0,
Wire a1,
Wire a2,
Wire e,
Wire d0,
Wire d1,
Wire d2,
Wire d3,
Wire d4,
Wire d5,
Wire d6,
Wire d7)
- Constructs a new d3_8e.
- Parameters:
- parent - The parent
Cell to the d3_8e
- a0 - The
Wire to be connected to input port a0
- a1 - The
Wire to be connected to input port a1
- a2 - The
Wire to be connected to input port a2
- e - The
Wire to be connected to input port e
- d0 - The
Wire to be connected to output port d0
- d1 - The
Wire to be connected to output port d1
- d2 - The
Wire to be connected to output port d2
- d3 - The
Wire to be connected to output port d3
- d4 - The
Wire to be connected to output port d4
- d5 - The
Wire to be connected to output port d5
- d6 - The
Wire to be connected to output port d6
- d7 - The
Wire to be connected to output port d7
d3_8e
public d3_8e(Node parent,
String instanceName,
Wire a0,
Wire a1,
Wire a2,
Wire e,
Wire d0,
Wire d1,
Wire d2,
Wire d3,
Wire d4,
Wire d5,
Wire d6,
Wire d7)
- Constructs a new d3_8e, with the initial
String parameter as the instance name.
- Parameters:
- parent - The parent
Cell to the d3_8e
- instanceName - The instance name of the d3_8e
- a0 - The
Wire to be connected to input port a0
- a1 - The
Wire to be connected to input port a1
- a2 - The
Wire to be connected to input port a2
- e - The
Wire to be connected to input port e
- d0 - The
Wire to be connected to output port d0
- d1 - The
Wire to be connected to output port d1
- d2 - The
Wire to be connected to output port d2
- d3 - The
Wire to be connected to output port d3
- d4 - The
Wire to be connected to output port d4
- d5 - The
Wire to be connected to output port d5
- d6 - The
Wire to be connected to output port d6
- d7 - The
Wire to be connected to output port d7
d3_8e
public d3_8e(Node parent,
String s0,
Wire w0,
String s1,
Wire w1,
String s2,
Wire w2,
String s3,
Wire w3,
String s4,
Wire w4,
String s5,
Wire w5,
String s6,
Wire w6,
String s7,
Wire w7,
String s8,
Wire w8,
String s9,
Wire w9,
String s10,
Wire w10,
String s11,
Wire w11)
- Constructs a new d3_8e, connecting each
Wire to the port whose name is given by the accompanying String parameter.
- Parameters:
- parent - The parent
Cell to the d3_8e
- s0 - The name of the port to which w0 will be connected
- w0 - The
Wire to be connected to the port specified by s0
- s1 - The name of the port to which w1 will be connected
- w1 - The
Wire to be connected to the port specified by s1
- s2 - The name of the port to which w2 will be connected
- w2 - The
Wire to be connected to the port specified by s2
- s3 - The name of the port to which w3 will be connected
- w3 - The
Wire to be connected to the port specified by s3
- s4 - The name of the port to which w4 will be connected
- w4 - The
Wire to be connected to the port specified by s4
- s5 - The name of the port to which w5 will be connected
- w5 - The
Wire to be connected to the port specified by s5
- s6 - The name of the port to which w6 will be connected
- w6 - The
Wire to be connected to the port specified by s6
- s7 - The name of the port to which w7 will be connected
- w7 - The
Wire to be connected to the port specified by s7
- s8 - The name of the port to which w8 will be connected
- w8 - The
Wire to be connected to the port specified by s8
- s9 - The name of the port to which w9 will be connected
- w9 - The
Wire to be connected to the port specified by s9
- s10 - The name of the port to which w10 will be connected
- w10 - The
Wire to be connected to the port specified by s10
- s11 - The name of the port to which w11 will be connected
- w11 - The
Wire to be connected to the port specified by s11
d3_8e
public d3_8e(Node parent,
String instanceName,
String s0,
Wire w0,
String s1,
Wire w1,
String s2,
Wire w2,
String s3,
Wire w3,
String s4,
Wire w4,
String s5,
Wire w5,
String s6,
Wire w6,
String s7,
Wire w7,
String s8,
Wire w8,
String s9,
Wire w9,
String s10,
Wire w10,
String s11,
Wire w11)
- Constructs a new d3_8e, connecting each
Wire to the port whose name is given by the accompanying String parameter, with the initial String parameter as the instance name.
- Parameters:
- parent - The parent
Cell to the d3_8e
- instanceName - The instance name of the d3_8e
- s0 - The name of the port to which w0 will be connected
- w0 - The
Wire to be connected to the port specified by s0
- s1 - The name of the port to which w1 will be connected
- w1 - The
Wire to be connected to the port specified by s1
- s2 - The name of the port to which w2 will be connected
- w2 - The
Wire to be connected to the port specified by s2
- s3 - The name of the port to which w3 will be connected
- w3 - The
Wire to be connected to the port specified by s3
- s4 - The name of the port to which w4 will be connected
- w4 - The
Wire to be connected to the port specified by s4
- s5 - The name of the port to which w5 will be connected
- w5 - The
Wire to be connected to the port specified by s5
- s6 - The name of the port to which w6 will be connected
- w6 - The
Wire to be connected to the port specified by s6
- s7 - The name of the port to which w7 will be connected
- w7 - The
Wire to be connected to the port specified by s7
- s8 - The name of the port to which w8 will be connected
- w8 - The
Wire to be connected to the port specified by s8
- s9 - The name of the port to which w9 will be connected
- w9 - The
Wire to be connected to the port specified by s9
- s10 - The name of the port to which w10 will be connected
- w10 - The
Wire to be connected to the port specified by s10
- s11 - The name of the port to which w11 will be connected
- w11 - The
Wire to be connected to the port specified by s11
d3_8e
public d3_8e(Node parent,
ArgBlockList abl)
- Constructs a new d3_8e, connecting its ports as given by the
String-Wire pairs in the ArgBlockList. Any generic assignments are made through String-String pairs in the ArgBlockList.
- Parameters:
- parent - The parent
Cell to the d3_8e
- abl - The list of
String-Wire pairs for port assignments, and String-String pairs for generic assignments.
d3_8e
public d3_8e(Node parent,
String instanceName,
ArgBlockList abl)
- Constructs a new d3_8e, connecting its ports as given by the
String-Wire pairs in the ArgBlockList, with the initial String parameter as the instance name. Any generic assignments are made through String-String pairs in the ArgBlockList.
- Parameters:
- parent - The parent
Cell to the d3_8e
- instanceName - The instance name of the d3_8e
- abl - The list of
String-Wire pairs for port assignments, and String-String pairs for generic assignments.
cellInterfaceDeterminesUniqueNetlistStructure
public final boolean cellInterfaceDeterminesUniqueNetlistStructure()
- Overrides:
- cellInterfaceDeterminesUniqueNetlistStructure in class Cell
type
public int type()
main
public static void main(String argv[])
test
public static void test()
All Packages Class Hierarchy This Package Previous Next Index