All Packages Class Hierarchy This Package Previous Next Index
Class byucc.jhdl.Xilinx.Virtex.obuft_s_24
java.lang.Object
|
+----byucc.jhdl.base.Nameable
|
+----byucc.jhdl.base.Node
|
+----byucc.jhdl.base.Cell
|
+----byucc.jhdl.base.CL
|
+----byucc.jhdl.Xilinx.Virtex.obuft_s_24
- public final class obuft_s_24
- extends CL
- implements UnmappableCell, PreDefinedSchematic
OBUFT and its variants (listed below) are single 3-state output
buffers with active-Low output Enable whose I/O interface
corresponds to a specific I/O standard. The name extensions
(LVCMOS2, PCI33_3, PCI33_5, etc.) specify the standard. The S, F,
and 2, 4, 6, 8, 12, 16, 24 extensions specify the slew rate (SLOW
or FAST) and the drive power (2, 4, 6, 8, 12, 16, 24 mA) for the
LVTTL standard. For example, OBUFT_S_4 is a 3-state output buffer
with active-Low output enable that uses the LVTTL I/O signaling
standard with a SLOW slew and 4mA of drive power.
OBUFT has selectable drive and slew rates using the DRIVE and FAST
or SLOW constraints. The defaults are DRIVE=12 mA and SLOW slew.
When T is Low, data on the input of the buffer is transferred to
the output. When T is High, the output is high impedance (off or Z
state). OBUFTs isolate the internal circuit and provide extra
drive current for signals leaving a chip. An OBUFT output is
connected to an OPAD or an IOPAD.
The hardware implementation of the I/O standards requires that you
follow a set of usage rules for the SelectI/O buffer
components. Refer to the \"SelectI/O Usage Rules\" section under the
IBUF_selectIO section for information on using these components.
(Source: XACT Libraries Guide, Chapter 8 OBUFT_selectIO, Xilinx Corporation,
1999.)
-
cell_interface
- The port interface for obuft_s_24:
i: in (1)
t: in (1)
o: out (1)
-
cellname
- The static cellname (netlist reference name) for obuft_s_24
-
obuft_s_24(Node)
- Used only by child classes to pass up the parent cell.
-
obuft_s_24(Node, ArgBlockList)
- Constructs a new obuft_s_24, connecting its ports as given by the
String-Wire pairs in the ArgBlockList.
-
obuft_s_24(Node, String)
- Used only by child classes to pass up the parent cell and instance name.
-
obuft_s_24(Node, String, ArgBlockList)
- Constructs a new obuft_s_24, connecting its ports as given by the
String-Wire pairs in the ArgBlockList, with the initial String parameter as the instance name.
-
obuft_s_24(Node, String, String, Wire, String, Wire, String, Wire)
- Constructs a new obuft_s_24, connecting each
Wire to the port whose name is given by the accompanying String parameter, with the initial String parameter as the instance name.
-
obuft_s_24(Node, String, Wire, String, Wire, String, Wire)
- Constructs a new obuft_s_24, connecting each
Wire to the port whose name is given by the accompanying String parameter.
-
obuft_s_24(Node, String, Wire, Wire, Wire)
- Constructs a new obuft_s_24, with the initial
String parameter as the instance name.
-
obuft_s_24(Node, Wire, Wire, Wire)
- Constructs a new obuft_s_24.
-
cellInterfaceDeterminesUniqueNetlistStructure()
-
-
main(String[])
-
-
propagate()
- Performs the asynchronous behavior of obuft_s_24.
-
test()
-
-
type()
-
cellname
public static final String cellname
- The static cellname (netlist reference name) for obuft_s_24
cell_interface
public static CellInterface cell_interface[]
- The port interface for obuft_s_24:
i: in (1)
t: in (1)
o: out (1)
obuft_s_24
protected obuft_s_24(Node parent)
- Used only by child classes to pass up the parent cell.
- Parameters:
- parent - Parent cell
obuft_s_24
protected obuft_s_24(Node parent,
String name)
- Used only by child classes to pass up the parent cell and instance name.
- Parameters:
- parent - Parent cell
- name - Instance name of the cell
obuft_s_24
public obuft_s_24(Node parent,
Wire i,
Wire t,
Wire o)
- Constructs a new obuft_s_24.
- Parameters:
- parent - The parent
Cell to the obuft_s_24
- i - The
Wire to be connected to input port i
- t - The
Wire to be connected to input port t
- o - The
Wire to be connected to output port o
obuft_s_24
public obuft_s_24(Node parent,
String instanceName,
Wire i,
Wire t,
Wire o)
- Constructs a new obuft_s_24, with the initial
String parameter as the instance name.
- Parameters:
- parent - The parent
Cell to the obuft_s_24
- instanceName - The instance name of the obuft_s_24
- i - The
Wire to be connected to input port i
- t - The
Wire to be connected to input port t
- o - The
Wire to be connected to output port o
obuft_s_24
public obuft_s_24(Node parent,
String s0,
Wire w0,
String s1,
Wire w1,
String s2,
Wire w2)
- Constructs a new obuft_s_24, connecting each
Wire to the port whose name is given by the accompanying String parameter.
- Parameters:
- parent - The parent
Cell to the obuft_s_24
- s0 - The name of the port to which w0 will be connected
- w0 - The
Wire to be connected to the port specified by s0
- s1 - The name of the port to which w1 will be connected
- w1 - The
Wire to be connected to the port specified by s1
- s2 - The name of the port to which w2 will be connected
- w2 - The
Wire to be connected to the port specified by s2
obuft_s_24
public obuft_s_24(Node parent,
String instanceName,
String s0,
Wire w0,
String s1,
Wire w1,
String s2,
Wire w2)
- Constructs a new obuft_s_24, connecting each
Wire to the port whose name is given by the accompanying String parameter, with the initial String parameter as the instance name.
- Parameters:
- parent - The parent
Cell to the obuft_s_24
- instanceName - The instance name of the obuft_s_24
- s0 - The name of the port to which w0 will be connected
- w0 - The
Wire to be connected to the port specified by s0
- s1 - The name of the port to which w1 will be connected
- w1 - The
Wire to be connected to the port specified by s1
- s2 - The name of the port to which w2 will be connected
- w2 - The
Wire to be connected to the port specified by s2
obuft_s_24
public obuft_s_24(Node parent,
ArgBlockList abl)
- Constructs a new obuft_s_24, connecting its ports as given by the
String-Wire pairs in the ArgBlockList. Any generic assignments are made through String-String pairs in the ArgBlockList.
- Parameters:
- parent - The parent
Cell to the obuft_s_24
- abl - The list of
String-Wire pairs for port assignments, and String-String pairs for generic assignments.
obuft_s_24
public obuft_s_24(Node parent,
String instanceName,
ArgBlockList abl)
- Constructs a new obuft_s_24, connecting its ports as given by the
String-Wire pairs in the ArgBlockList, with the initial String parameter as the instance name. Any generic assignments are made through String-String pairs in the ArgBlockList.
- Parameters:
- parent - The parent
Cell to the obuft_s_24
- instanceName - The instance name of the obuft_s_24
- abl - The list of
String-Wire pairs for port assignments, and String-String pairs for generic assignments.
propagate
public final void propagate()
- Performs the asynchronous behavior of obuft_s_24.
- Overrides:
- propagate in class CL
cellInterfaceDeterminesUniqueNetlistStructure
public final boolean cellInterfaceDeterminesUniqueNetlistStructure()
- Overrides:
- cellInterfaceDeterminesUniqueNetlistStructure in class CL
type
public int type()
main
public static void main(String argv[])
test
public static void test()
All Packages Class Hierarchy This Package Previous Next Index