All Packages  Class Hierarchy  This Package  Previous  Next  Index

Class byucc.jhdl.Xilinx.Virtex.obuft_s_4

java.lang.Object
   |
   +----byucc.jhdl.base.Nameable
           |
           +----byucc.jhdl.base.Node
                   |
                   +----byucc.jhdl.base.Cell
                           |
                           +----byucc.jhdl.base.CL
                                   |
                                   +----byucc.jhdl.Xilinx.Virtex.obuft_s_4

public final class obuft_s_4
extends CL
implements UnmappableCell, PreDefinedSchematic
OBUFT and its variants (listed below) are single 3-state output buffers with active-Low output Enable whose I/O interface corresponds to a specific I/O standard. The name extensions (LVCMOS2, PCI33_3, PCI33_5, etc.) specify the standard. The S, F, and 2, 4, 6, 8, 12, 16, 24 extensions specify the slew rate (SLOW or FAST) and the drive power (2, 4, 6, 8, 12, 16, 24 mA) for the LVTTL standard. For example, OBUFT_S_4 is a 3-state output buffer with active-Low output enable that uses the LVTTL I/O signaling standard with a SLOW slew and 4mA of drive power. OBUFT has selectable drive and slew rates using the DRIVE and FAST or SLOW constraints. The defaults are DRIVE=12 mA and SLOW slew. When T is Low, data on the input of the buffer is transferred to the output. When T is High, the output is high impedance (off or Z state). OBUFTs isolate the internal circuit and provide extra drive current for signals leaving a chip. An OBUFT output is connected to an OPAD or an IOPAD. The hardware implementation of the I/O standards requires that you follow a set of usage rules for the SelectI/O buffer components. Refer to the \"SelectI/O Usage Rules\" section under the IBUF_selectIO section for information on using these components. (Source: XACT Libraries Guide, Chapter 8 OBUFT_selectIO, Xilinx Corporation, 1999.)


Variable Index

 o cell_interface
The port interface for obuft_s_4: i: in (1) t: in (1) o: out (1)
 o cellname
The static cellname (netlist reference name) for obuft_s_4

Constructor Index

 o obuft_s_4(Node)
Used only by child classes to pass up the parent cell.
 o obuft_s_4(Node, ArgBlockList)
Constructs a new obuft_s_4, connecting its ports as given by the String-Wire pairs in the ArgBlockList.
 o obuft_s_4(Node, String)
Used only by child classes to pass up the parent cell and instance name.
 o obuft_s_4(Node, String, ArgBlockList)
Constructs a new obuft_s_4, connecting its ports as given by the String-Wire pairs in the ArgBlockList, with the initial String parameter as the instance name.
 o obuft_s_4(Node, String, String, Wire, String, Wire, String, Wire)
Constructs a new obuft_s_4, connecting each Wire to the port whose name is given by the accompanying String parameter, with the initial String parameter as the instance name.
 o obuft_s_4(Node, String, Wire, String, Wire, String, Wire)
Constructs a new obuft_s_4, connecting each Wire to the port whose name is given by the accompanying String parameter.
 o obuft_s_4(Node, String, Wire, Wire, Wire)
Constructs a new obuft_s_4, with the initial String parameter as the instance name.
 o obuft_s_4(Node, Wire, Wire, Wire)
Constructs a new obuft_s_4.

Method Index

 o cellInterfaceDeterminesUniqueNetlistStructure()
 o main(String[])
 o propagate()
Performs the asynchronous behavior of obuft_s_4.
 o test()
 o type()

Variables

 o cellname
 public static final String cellname
The static cellname (netlist reference name) for obuft_s_4

 o cell_interface
 public static CellInterface cell_interface[]
The port interface for obuft_s_4: i: in (1) t: in (1) o: out (1)

Constructors

 o obuft_s_4
 protected obuft_s_4(Node parent)
Used only by child classes to pass up the parent cell.

Parameters:
parent - Parent cell
 o obuft_s_4
 protected obuft_s_4(Node parent,
                     String name)
Used only by child classes to pass up the parent cell and instance name.

Parameters:
parent - Parent cell
name - Instance name of the cell
 o obuft_s_4
 public obuft_s_4(Node parent,
                  Wire i,
                  Wire t,
                  Wire o)
Constructs a new obuft_s_4.

Parameters:
parent - The parent Cell to the obuft_s_4
i - The Wire to be connected to input port i
t - The Wire to be connected to input port t
o - The Wire to be connected to output port o
 o obuft_s_4
 public obuft_s_4(Node parent,
                  String instanceName,
                  Wire i,
                  Wire t,
                  Wire o)
Constructs a new obuft_s_4, with the initial String parameter as the instance name.

Parameters:
parent - The parent Cell to the obuft_s_4
instanceName - The instance name of the obuft_s_4
i - The Wire to be connected to input port i
t - The Wire to be connected to input port t
o - The Wire to be connected to output port o
 o obuft_s_4
 public obuft_s_4(Node parent,
                  String s0,
                  Wire w0,
                  String s1,
                  Wire w1,
                  String s2,
                  Wire w2)
Constructs a new obuft_s_4, connecting each Wire to the port whose name is given by the accompanying String parameter.

Parameters:
parent - The parent Cell to the obuft_s_4
s0 - The name of the port to which w0 will be connected
w0 - The Wire to be connected to the port specified by s0
s1 - The name of the port to which w1 will be connected
w1 - The Wire to be connected to the port specified by s1
s2 - The name of the port to which w2 will be connected
w2 - The Wire to be connected to the port specified by s2
 o obuft_s_4
 public obuft_s_4(Node parent,
                  String instanceName,
                  String s0,
                  Wire w0,
                  String s1,
                  Wire w1,
                  String s2,
                  Wire w2)
Constructs a new obuft_s_4, connecting each Wire to the port whose name is given by the accompanying String parameter, with the initial String parameter as the instance name.

Parameters:
parent - The parent Cell to the obuft_s_4
instanceName - The instance name of the obuft_s_4
s0 - The name of the port to which w0 will be connected
w0 - The Wire to be connected to the port specified by s0
s1 - The name of the port to which w1 will be connected
w1 - The Wire to be connected to the port specified by s1
s2 - The name of the port to which w2 will be connected
w2 - The Wire to be connected to the port specified by s2
 o obuft_s_4
 public obuft_s_4(Node parent,
                  ArgBlockList abl)
Constructs a new obuft_s_4, connecting its ports as given by the String-Wire pairs in the ArgBlockList. Any generic assignments are made through String-String pairs in the ArgBlockList.

Parameters:
parent - The parent Cell to the obuft_s_4
abl - The list of String-Wire pairs for port assignments, and String-String pairs for generic assignments.
 o obuft_s_4
 public obuft_s_4(Node parent,
                  String instanceName,
                  ArgBlockList abl)
Constructs a new obuft_s_4, connecting its ports as given by the String-Wire pairs in the ArgBlockList, with the initial String parameter as the instance name. Any generic assignments are made through String-String pairs in the ArgBlockList.

Parameters:
parent - The parent Cell to the obuft_s_4
instanceName - The instance name of the obuft_s_4
abl - The list of String-Wire pairs for port assignments, and String-String pairs for generic assignments.

Methods

 o propagate
 public final void propagate()
Performs the asynchronous behavior of obuft_s_4.

Overrides:
propagate in class CL
 o cellInterfaceDeterminesUniqueNetlistStructure
 public final boolean cellInterfaceDeterminesUniqueNetlistStructure()
Overrides:
cellInterfaceDeterminesUniqueNetlistStructure in class CL
 o type
 public int type()
 o main
 public static void main(String argv[])
 o test
 public static void test()

All Packages  Class Hierarchy  This Package  Previous  Next  Index