All Packages Class Hierarchy This Package Previous Next Index
Class byucc.jhdl.Xilinx.XC4000.ilffxi
java.lang.Object
|
+----byucc.jhdl.base.Nameable
|
+----byucc.jhdl.base.Node
|
+----byucc.jhdl.base.Cell
|
+----byucc.jhdl.base.Structural
|
+----byucc.jhdl.Logic.Logic
|
+----byucc.jhdl.Xilinx.XC4000.ilffxi
- public final class ilffxi
- extends Logic
- implements PreDefinedSchematic
ILFFXI, an optional latch that drives the input flip-flop, allows
the very fast capture of input data. Located on the input side of
an IOB, the latch is latched by the output clock - the clock used
for the output flip-flop - rather than the input clock. Thus, two
different clocks can be used to clock the two input storage
elements. See \"Block Diagram of XC4000X IOB\" figure in the ILFFX
section. After the data is captured, it is then synchronized to
the internal clock by the IOB flip-flop.
The latch input (D) is connected to an IPAD or an IOPAD (without
using an IBUF). When the gate input (GF) is Low, the data at the
input (D) appears at INODE and is stored during the Low-to-High GF
transition. The captured INODE data appears at output (Q) during a
Low-to-High clock (C) transition.
This component is identical to ILFFX except that on active GSR it
is preset instead of cleared. The latch is asynchronously preset,
output High, when power is applied. FPGAs simulate power-on when
global set/reset (GSR) is active. GSR defaults to active-High but
can be inverted by adding an inverter in front of the GSR input of
the STARTUP symbol.
(Source: XACT Libraries Guide, Chapter 6 ILFFXI, Xilinx Corporation,
1999.)
(Note for use with XC4000X only)
-
cell_interface
- The port interface for ilffxi:
ce: in (1)
d: in (1)
gf: in (1)
q: out (1)
-
cellname
- The static cellname (netlist reference name) for ilffxi
-
ilffxi(Node)
- Used only by child classes to pass up the parent cell.
-
ilffxi(Node, ArgBlockList)
- Constructs a new ilffxi, connecting its ports as given by the
String-Wire pairs in the ArgBlockList.
-
ilffxi(Node, String)
- Used only by child classes to pass up the parent cell and instance name.
-
ilffxi(Node, String, ArgBlockList)
- Constructs a new ilffxi, connecting its ports as given by the
String-Wire pairs in the ArgBlockList, with the initial String parameter as the instance name.
-
ilffxi(Node, String, String, Wire, String, Wire, String, Wire, String, Wire)
- Constructs a new ilffxi, connecting each
Wire to the port whose name is given by the accompanying String parameter, with the initial String parameter as the instance name.
-
ilffxi(Node, String, Wire, String, Wire, String, Wire, String, Wire)
- Constructs a new ilffxi, connecting each
Wire to the port whose name is given by the accompanying String parameter.
-
ilffxi(Node, String, Wire, Wire, Wire, Wire)
- Constructs a new ilffxi, with the initial
String parameter as the instance name.
-
ilffxi(Node, Wire, Wire, Wire, Wire)
- Constructs a new ilffxi.
-
cellInterfaceDeterminesUniqueNetlistStructure()
-
-
clock()
- Performs the synchronous behavior of ilffxi.
-
main(String[])
-
-
propagate()
- Performs the asynchronous behavior of ilffxi.
-
reset()
- Performs the reset behavior of ilffxi.
-
test()
-
-
type()
-
cellname
public static final String cellname
- The static cellname (netlist reference name) for ilffxi
cell_interface
public static CellInterface cell_interface[]
- The port interface for ilffxi:
ce: in (1)
d: in (1)
gf: in (1)
q: out (1)
ilffxi
protected ilffxi(Node parent)
- Used only by child classes to pass up the parent cell.
- Parameters:
- parent - Parent cell
ilffxi
protected ilffxi(Node parent,
String name)
- Used only by child classes to pass up the parent cell and instance name.
- Parameters:
- parent - Parent cell
- name - Instance name of the cell
ilffxi
public ilffxi(Node parent,
Wire ce,
Wire d,
Wire gf,
Wire q)
- Constructs a new ilffxi.
- Parameters:
- parent - The parent
Cell to the ilffxi
- ce - The
Wire to be connected to input port ce
- d - The
Wire to be connected to input port d
- gf - The
Wire to be connected to input port gf
- q - The
Wire to be connected to output port q
ilffxi
public ilffxi(Node parent,
String instanceName,
Wire ce,
Wire d,
Wire gf,
Wire q)
- Constructs a new ilffxi, with the initial
String parameter as the instance name.
- Parameters:
- parent - The parent
Cell to the ilffxi
- instanceName - The instance name of the ilffxi
- ce - The
Wire to be connected to input port ce
- d - The
Wire to be connected to input port d
- gf - The
Wire to be connected to input port gf
- q - The
Wire to be connected to output port q
ilffxi
public ilffxi(Node parent,
String s0,
Wire w0,
String s1,
Wire w1,
String s2,
Wire w2,
String s3,
Wire w3)
- Constructs a new ilffxi, connecting each
Wire to the port whose name is given by the accompanying String parameter.
- Parameters:
- parent - The parent
Cell to the ilffxi
- s0 - The name of the port to which w0 will be connected
- w0 - The
Wire to be connected to the port specified by s0
- s1 - The name of the port to which w1 will be connected
- w1 - The
Wire to be connected to the port specified by s1
- s2 - The name of the port to which w2 will be connected
- w2 - The
Wire to be connected to the port specified by s2
- s3 - The name of the port to which w3 will be connected
- w3 - The
Wire to be connected to the port specified by s3
ilffxi
public ilffxi(Node parent,
String instanceName,
String s0,
Wire w0,
String s1,
Wire w1,
String s2,
Wire w2,
String s3,
Wire w3)
- Constructs a new ilffxi, connecting each
Wire to the port whose name is given by the accompanying String parameter, with the initial String parameter as the instance name.
- Parameters:
- parent - The parent
Cell to the ilffxi
- instanceName - The instance name of the ilffxi
- s0 - The name of the port to which w0 will be connected
- w0 - The
Wire to be connected to the port specified by s0
- s1 - The name of the port to which w1 will be connected
- w1 - The
Wire to be connected to the port specified by s1
- s2 - The name of the port to which w2 will be connected
- w2 - The
Wire to be connected to the port specified by s2
- s3 - The name of the port to which w3 will be connected
- w3 - The
Wire to be connected to the port specified by s3
ilffxi
public ilffxi(Node parent,
ArgBlockList abl)
- Constructs a new ilffxi, connecting its ports as given by the
String-Wire pairs in the ArgBlockList. Any generic assignments are made through String-String pairs in the ArgBlockList.
- Parameters:
- parent - The parent
Cell to the ilffxi
- abl - The list of
String-Wire pairs for port assignments, and String-String pairs for generic assignments.
ilffxi
public ilffxi(Node parent,
String instanceName,
ArgBlockList abl)
- Constructs a new ilffxi, connecting its ports as given by the
String-Wire pairs in the ArgBlockList, with the initial String parameter as the instance name. Any generic assignments are made through String-String pairs in the ArgBlockList.
- Parameters:
- parent - The parent
Cell to the ilffxi
- instanceName - The instance name of the ilffxi
- abl - The list of
String-Wire pairs for port assignments, and String-String pairs for generic assignments.
cellInterfaceDeterminesUniqueNetlistStructure
public final boolean cellInterfaceDeterminesUniqueNetlistStructure()
- Overrides:
- cellInterfaceDeterminesUniqueNetlistStructure in class Cell
clock
public final void clock()
- Performs the synchronous behavior of ilffxi.
- Overrides:
- clock in class Structural
reset
public void reset()
- Performs the reset behavior of ilffxi. Reset state is defined as:
- Overrides:
- reset in class Structural
propagate
public final void propagate()
- Performs the asynchronous behavior of ilffxi.
- Overrides:
- propagate in class Structural
type
public int type()
main
public static void main(String argv[])
test
public static void test()
All Packages Class Hierarchy This Package Previous Next Index