All Packages  Class Hierarchy  This Package  Previous  Next  Index

Class byucc.jhdl.Xilinx.XC4000.ilflx_1

java.lang.Object
   |
   +----byucc.jhdl.base.Nameable
           |
           +----byucc.jhdl.base.Node
                   |
                   +----byucc.jhdl.base.Cell
                           |
                           +----byucc.jhdl.base.Structural
                                   |
                                   +----byucc.jhdl.Logic.Logic
                                           |
                                           +----byucc.jhdl.Xilinx.XC4000.ilflx_1

public final class ilflx_1
extends Logic
implements PreDefinedSchematic
ILFLX_1, an optional latch that drives the input latch, allows the very fast capture of input data. Located on the input side of an IOB, the latch is latched by the output clock - the clock used for the output flip-flop - rather than the input clock. Thus, two different clocks can be used to clock the two input storage elements. See the \"Block Diagram of XC4000X IOB\" figure in the ILFFX section. After the data is captured, it is then synchronized to the internal clock by the IOB latch. The latch input (D) is connected to an IPAD or an IOPAD (without using an IBUF). When the gate input (GF) is Low, the data at the input (D) appears at INODE and is stored during the Low-to-High GF transition. The captured INODE data appears on the output (Q) when the gate (G) is Low. The fast latch is asynchronously cleared when power is applied. FPGAs simulate power-on when global set/reset (GSR) is active. GSR defaults to active-High but can be inverted by adding an inverter in front of the GSR input of the STARTUP symbol. (Source: XACT Libraries Guide, Chapter 6 ILFLX_1, Xilinx Corporation, 1999.) (Note for use with XC4000X only)


Variable Index

 o cell_interface
The port interface for ilflx_1: ge: in (1) d: in (1) gf: in (1) g: in (1) q: out (1)
 o cellname
The static cellname (netlist reference name) for ilflx_1

Constructor Index

 o ilflx_1(Node)
Used only by child classes to pass up the parent cell.
 o ilflx_1(Node, ArgBlockList)
Constructs a new ilflx_1, connecting its ports as given by the String-Wire pairs in the ArgBlockList.
 o ilflx_1(Node, String)
Used only by child classes to pass up the parent cell and instance name.
 o ilflx_1(Node, String, ArgBlockList)
Constructs a new ilflx_1, connecting its ports as given by the String-Wire pairs in the ArgBlockList, with the initial String parameter as the instance name.
 o ilflx_1(Node, String, String, Wire, String, Wire, String, Wire, String, Wire, String, Wire)
Constructs a new ilflx_1, connecting each Wire to the port whose name is given by the accompanying String parameter, with the initial String parameter as the instance name.
 o ilflx_1(Node, String, Wire, String, Wire, String, Wire, String, Wire, String, Wire)
Constructs a new ilflx_1, connecting each Wire to the port whose name is given by the accompanying String parameter.
 o ilflx_1(Node, String, Wire, Wire, Wire, Wire, Wire)
Constructs a new ilflx_1, with the initial String parameter as the instance name.
 o ilflx_1(Node, Wire, Wire, Wire, Wire, Wire)
Constructs a new ilflx_1.

Method Index

 o cellInterfaceDeterminesUniqueNetlistStructure()
 o clock()
Performs the synchronous behavior of ilflx_1.
 o main(String[])
 o propagate()
Performs the asynchronous behavior of ilflx_1.
 o reset()
Performs the reset behavior of ilflx_1.
 o test()
 o type()

Variables

 o cellname
 public static final String cellname
The static cellname (netlist reference name) for ilflx_1

 o cell_interface
 public static CellInterface cell_interface[]
The port interface for ilflx_1: ge: in (1) d: in (1) gf: in (1) g: in (1) q: out (1)

Constructors

 o ilflx_1
 protected ilflx_1(Node parent)
Used only by child classes to pass up the parent cell.

Parameters:
parent - Parent cell
 o ilflx_1
 protected ilflx_1(Node parent,
                   String name)
Used only by child classes to pass up the parent cell and instance name.

Parameters:
parent - Parent cell
name - Instance name of the cell
 o ilflx_1
 public ilflx_1(Node parent,
                Wire ge,
                Wire d,
                Wire gf,
                Wire g,
                Wire q)
Constructs a new ilflx_1.

Parameters:
parent - The parent Cell to the ilflx_1
ge - The Wire to be connected to input port ge
d - The Wire to be connected to input port d
gf - The Wire to be connected to input port gf
g - The Wire to be connected to input port g
q - The Wire to be connected to output port q
 o ilflx_1
 public ilflx_1(Node parent,
                String instanceName,
                Wire ge,
                Wire d,
                Wire gf,
                Wire g,
                Wire q)
Constructs a new ilflx_1, with the initial String parameter as the instance name.

Parameters:
parent - The parent Cell to the ilflx_1
instanceName - The instance name of the ilflx_1
ge - The Wire to be connected to input port ge
d - The Wire to be connected to input port d
gf - The Wire to be connected to input port gf
g - The Wire to be connected to input port g
q - The Wire to be connected to output port q
 o ilflx_1
 public ilflx_1(Node parent,
                String s0,
                Wire w0,
                String s1,
                Wire w1,
                String s2,
                Wire w2,
                String s3,
                Wire w3,
                String s4,
                Wire w4)
Constructs a new ilflx_1, connecting each Wire to the port whose name is given by the accompanying String parameter.

Parameters:
parent - The parent Cell to the ilflx_1
s0 - The name of the port to which w0 will be connected
w0 - The Wire to be connected to the port specified by s0
s1 - The name of the port to which w1 will be connected
w1 - The Wire to be connected to the port specified by s1
s2 - The name of the port to which w2 will be connected
w2 - The Wire to be connected to the port specified by s2
s3 - The name of the port to which w3 will be connected
w3 - The Wire to be connected to the port specified by s3
s4 - The name of the port to which w4 will be connected
w4 - The Wire to be connected to the port specified by s4
 o ilflx_1
 public ilflx_1(Node parent,
                String instanceName,
                String s0,
                Wire w0,
                String s1,
                Wire w1,
                String s2,
                Wire w2,
                String s3,
                Wire w3,
                String s4,
                Wire w4)
Constructs a new ilflx_1, connecting each Wire to the port whose name is given by the accompanying String parameter, with the initial String parameter as the instance name.

Parameters:
parent - The parent Cell to the ilflx_1
instanceName - The instance name of the ilflx_1
s0 - The name of the port to which w0 will be connected
w0 - The Wire to be connected to the port specified by s0
s1 - The name of the port to which w1 will be connected
w1 - The Wire to be connected to the port specified by s1
s2 - The name of the port to which w2 will be connected
w2 - The Wire to be connected to the port specified by s2
s3 - The name of the port to which w3 will be connected
w3 - The Wire to be connected to the port specified by s3
s4 - The name of the port to which w4 will be connected
w4 - The Wire to be connected to the port specified by s4
 o ilflx_1
 public ilflx_1(Node parent,
                ArgBlockList abl)
Constructs a new ilflx_1, connecting its ports as given by the String-Wire pairs in the ArgBlockList. Any generic assignments are made through String-String pairs in the ArgBlockList.

Parameters:
parent - The parent Cell to the ilflx_1
abl - The list of String-Wire pairs for port assignments, and String-String pairs for generic assignments.
 o ilflx_1
 public ilflx_1(Node parent,
                String instanceName,
                ArgBlockList abl)
Constructs a new ilflx_1, connecting its ports as given by the String-Wire pairs in the ArgBlockList, with the initial String parameter as the instance name. Any generic assignments are made through String-String pairs in the ArgBlockList.

Parameters:
parent - The parent Cell to the ilflx_1
instanceName - The instance name of the ilflx_1
abl - The list of String-Wire pairs for port assignments, and String-String pairs for generic assignments.

Methods

 o cellInterfaceDeterminesUniqueNetlistStructure
 public final boolean cellInterfaceDeterminesUniqueNetlistStructure()
Overrides:
cellInterfaceDeterminesUniqueNetlistStructure in class Cell
 o clock
 public final void clock()
Performs the synchronous behavior of ilflx_1.

Overrides:
clock in class Structural
 o reset
 public void reset()
Performs the reset behavior of ilflx_1. Reset state is defined as:

Overrides:
reset in class Structural
 o propagate
 public final void propagate()
Performs the asynchronous behavior of ilflx_1.

Overrides:
propagate in class Structural
 o type
 public int type()
 o main
 public static void main(String argv[])
 o test
 public static void test()

All Packages  Class Hierarchy  This Package  Previous  Next  Index