All Packages Class Hierarchy This Package Previous Next Index
Class byucc.jhdl.Xilinx.XC4000.ilflxi_1
java.lang.Object
|
+----byucc.jhdl.base.Nameable
|
+----byucc.jhdl.base.Node
|
+----byucc.jhdl.base.Cell
|
+----byucc.jhdl.base.Structural
|
+----byucc.jhdl.Logic.Logic
|
+----byucc.jhdl.Xilinx.XC4000.ilflxi_1
- public final class ilflxi_1
- extends Logic
- implements PreDefinedSchematic
ILFLXI_1, an optional latch that drives the input latch, allows
the very fast capture of input data. Located on the input side of
an IOB, the latch is latched by the output clock - the clock used
for the output flip-flop - rather than the input clock. Thus, two
different clocks can be used to clock the two input storage
elements. See the \"Block Diagram of XC4000X IOB\" figure in the
ILFFX section. After the data is captured, it is then synchronized
to the internal clock by the IOB latch.
The latch input (D) is connected to an IPAD or an IOPAD (without
using an IBUF). When the gate input (GF) is Low, the data at the
input (D) appears at INODE and is stored during the Low-to-High GF
transition. The captured INODE data appears on the output (Q) when
the gate (G) is Low.
The fast latch is asynchronously preset when power is applied.
FPGAs simulate power-on when global set/reset (GSR) is
active. GSR defaults to active-High but can be inverted by adding
an inverter in front of the GSR input of the STARTUP symbol.
(Source: XACT Libraries Guide, Chapter 6 ILFLXI_1, Xilinx Corporation,
1999.)
(Note for use with XC4000X only)
-
cell_interface
- The port interface for ilflxi_1:
ge: in (1)
d: in (1)
gf: in (1)
g: in (1)
q: out (1)
-
cellname
- The static cellname (netlist reference name) for ilflxi_1
-
ilflxi_1(Node)
- Used only by child classes to pass up the parent cell.
-
ilflxi_1(Node, ArgBlockList)
- Constructs a new ilflxi_1, connecting its ports as given by the
String-Wire pairs in the ArgBlockList.
-
ilflxi_1(Node, String)
- Used only by child classes to pass up the parent cell and instance name.
-
ilflxi_1(Node, String, ArgBlockList)
- Constructs a new ilflxi_1, connecting its ports as given by the
String-Wire pairs in the ArgBlockList, with the initial String parameter as the instance name.
-
ilflxi_1(Node, String, String, Wire, String, Wire, String, Wire, String, Wire, String, Wire)
- Constructs a new ilflxi_1, connecting each
Wire to the port whose name is given by the accompanying String parameter, with the initial String parameter as the instance name.
-
ilflxi_1(Node, String, Wire, String, Wire, String, Wire, String, Wire, String, Wire)
- Constructs a new ilflxi_1, connecting each
Wire to the port whose name is given by the accompanying String parameter.
-
ilflxi_1(Node, String, Wire, Wire, Wire, Wire, Wire)
- Constructs a new ilflxi_1, with the initial
String parameter as the instance name.
-
ilflxi_1(Node, Wire, Wire, Wire, Wire, Wire)
- Constructs a new ilflxi_1.
-
cellInterfaceDeterminesUniqueNetlistStructure()
-
-
clock()
- Performs the synchronous behavior of ilflxi_1.
-
main(String[])
-
-
propagate()
- Performs the asynchronous behavior of ilflxi_1.
-
reset()
- Performs the reset behavior of ilflxi_1.
-
test()
-
-
type()
-
cellname
public static final String cellname
- The static cellname (netlist reference name) for ilflxi_1
cell_interface
public static CellInterface cell_interface[]
- The port interface for ilflxi_1:
ge: in (1)
d: in (1)
gf: in (1)
g: in (1)
q: out (1)
ilflxi_1
protected ilflxi_1(Node parent)
- Used only by child classes to pass up the parent cell.
- Parameters:
- parent - Parent cell
ilflxi_1
protected ilflxi_1(Node parent,
String name)
- Used only by child classes to pass up the parent cell and instance name.
- Parameters:
- parent - Parent cell
- name - Instance name of the cell
ilflxi_1
public ilflxi_1(Node parent,
Wire ge,
Wire d,
Wire gf,
Wire g,
Wire q)
- Constructs a new ilflxi_1.
- Parameters:
- parent - The parent
Cell to the ilflxi_1
- ge - The
Wire to be connected to input port ge
- d - The
Wire to be connected to input port d
- gf - The
Wire to be connected to input port gf
- g - The
Wire to be connected to input port g
- q - The
Wire to be connected to output port q
ilflxi_1
public ilflxi_1(Node parent,
String instanceName,
Wire ge,
Wire d,
Wire gf,
Wire g,
Wire q)
- Constructs a new ilflxi_1, with the initial
String parameter as the instance name.
- Parameters:
- parent - The parent
Cell to the ilflxi_1
- instanceName - The instance name of the ilflxi_1
- ge - The
Wire to be connected to input port ge
- d - The
Wire to be connected to input port d
- gf - The
Wire to be connected to input port gf
- g - The
Wire to be connected to input port g
- q - The
Wire to be connected to output port q
ilflxi_1
public ilflxi_1(Node parent,
String s0,
Wire w0,
String s1,
Wire w1,
String s2,
Wire w2,
String s3,
Wire w3,
String s4,
Wire w4)
- Constructs a new ilflxi_1, connecting each
Wire to the port whose name is given by the accompanying String parameter.
- Parameters:
- parent - The parent
Cell to the ilflxi_1
- s0 - The name of the port to which w0 will be connected
- w0 - The
Wire to be connected to the port specified by s0
- s1 - The name of the port to which w1 will be connected
- w1 - The
Wire to be connected to the port specified by s1
- s2 - The name of the port to which w2 will be connected
- w2 - The
Wire to be connected to the port specified by s2
- s3 - The name of the port to which w3 will be connected
- w3 - The
Wire to be connected to the port specified by s3
- s4 - The name of the port to which w4 will be connected
- w4 - The
Wire to be connected to the port specified by s4
ilflxi_1
public ilflxi_1(Node parent,
String instanceName,
String s0,
Wire w0,
String s1,
Wire w1,
String s2,
Wire w2,
String s3,
Wire w3,
String s4,
Wire w4)
- Constructs a new ilflxi_1, connecting each
Wire to the port whose name is given by the accompanying String parameter, with the initial String parameter as the instance name.
- Parameters:
- parent - The parent
Cell to the ilflxi_1
- instanceName - The instance name of the ilflxi_1
- s0 - The name of the port to which w0 will be connected
- w0 - The
Wire to be connected to the port specified by s0
- s1 - The name of the port to which w1 will be connected
- w1 - The
Wire to be connected to the port specified by s1
- s2 - The name of the port to which w2 will be connected
- w2 - The
Wire to be connected to the port specified by s2
- s3 - The name of the port to which w3 will be connected
- w3 - The
Wire to be connected to the port specified by s3
- s4 - The name of the port to which w4 will be connected
- w4 - The
Wire to be connected to the port specified by s4
ilflxi_1
public ilflxi_1(Node parent,
ArgBlockList abl)
- Constructs a new ilflxi_1, connecting its ports as given by the
String-Wire pairs in the ArgBlockList. Any generic assignments are made through String-String pairs in the ArgBlockList.
- Parameters:
- parent - The parent
Cell to the ilflxi_1
- abl - The list of
String-Wire pairs for port assignments, and String-String pairs for generic assignments.
ilflxi_1
public ilflxi_1(Node parent,
String instanceName,
ArgBlockList abl)
- Constructs a new ilflxi_1, connecting its ports as given by the
String-Wire pairs in the ArgBlockList, with the initial String parameter as the instance name. Any generic assignments are made through String-String pairs in the ArgBlockList.
- Parameters:
- parent - The parent
Cell to the ilflxi_1
- instanceName - The instance name of the ilflxi_1
- abl - The list of
String-Wire pairs for port assignments, and String-String pairs for generic assignments.
cellInterfaceDeterminesUniqueNetlistStructure
public final boolean cellInterfaceDeterminesUniqueNetlistStructure()
- Overrides:
- cellInterfaceDeterminesUniqueNetlistStructure in class Cell
clock
public final void clock()
- Performs the synchronous behavior of ilflxi_1.
- Overrides:
- clock in class Structural
reset
public void reset()
- Performs the reset behavior of ilflxi_1. Reset state is defined as:
- Overrides:
- reset in class Structural
propagate
public final void propagate()
- Performs the asynchronous behavior of ilflxi_1.
- Overrides:
- propagate in class Structural
type
public int type()
main
public static void main(String argv[])
test
public static void test()
All Packages Class Hierarchy This Package Previous Next Index