All Packages Class Hierarchy This Package Previous Next Index
Class byucc.jhdl.Xilinx.bufgp
java.lang.Object
|
+----byucc.jhdl.base.Nameable
|
+----byucc.jhdl.base.Node
|
+----byucc.jhdl.base.Cell
|
+----byucc.jhdl.base.CL
|
+----byucc.jhdl.Xilinx.bufgp
- public final class bufgp
- extends CL
- implements UnmappableCell, PreDefinedSchematic
BUFGS, a secondary global buffer, distributes high fan-out clock
or control signals throughout a PLD device. In CPLD designs,
BUFGS is treated like BUFG. BUFGS provides direct access to
Configurable Logic Block (CLB) clock pins and limited access to
other CLB inputs. Four BUFGSs are available on each XC4000E and
Spartan device, one in each corner. The input to a BUFGS comes
either from a dedicated Input Output Block (IOB) or from an
internal signal.
Alongside each column of CLBs in an XC4000E or Spartan device are
four global vertical lines, which are in addition to the standard
vertical longlines. Each one of the four global vertical lines can
drive the CLB clock (K) pin directly. In addition, one of the four
lines can drive the F3 pin, a second line can drive the G1 pin, a
third can drive the C3 pin, and a fourth can drive the C1
pin. Each of the four BUFGSs can drive any of these global
vertical lines and are also used as the primary global buffers
(refer also to the BUFGP section for more information).
Because of its structure, a BUFGS can always access a clock pin
directly. Because the BUFGS is more flexible than the BUFGP, it
can use additional global vertical lines to access the F3, G1, C3,
and C1 pins but requires multiple vertical lines in the same
column. If the vertical lines in a given column are already used
for BUFGPs or another BUFGS, PAR might have to feed signals
through other CLBs to reach the load pins.
To use a BUFGS in a schematic, connect the input of the BUFGS
element either directly to the PAD symbol (for an external input)
or to an internally sourced net. For an external signal, do not
use any IBUFs, because the signal comes directly from the
dedicated IOB. The output of the BUFGS is then used throughout the
schematic. For a negative-edge clock, insert an INV (inverter)
element between the output of the BUFGS and the clock input. This
inversion is performed inside each CLB or IOB.
The dedicated inputs for BUFGSs are identified by the names SGCK1
through SGCK4 in pinouts in XC4000E and Spartan. The package pin
that drives the BUFGS depends on which corner the BUFGS is placed
by PAR.
(Source: XACT Libraries Guide, Chapter 3 BUFGP, Xilinx Corporation,
1999.)
(Note for use with XC4000E and Virtex)
-
cell_interface
- The port interface for bufgp:
i: in (1)
o: out (1)
-
cellname
- The static cellname (netlist reference name) for bufgp
-
bufgp(Node)
- Used only by child classes to pass up the parent cell.
-
bufgp(Node, ArgBlockList)
- Constructs a new bufgp, connecting its ports as given by the
String-Wire pairs in the ArgBlockList.
-
bufgp(Node, String)
- Used only by child classes to pass up the parent cell and instance name.
-
bufgp(Node, String, ArgBlockList)
- Constructs a new bufgp, connecting its ports as given by the
String-Wire pairs in the ArgBlockList, with the initial String parameter as the instance name.
-
bufgp(Node, String, String, Wire, String, Wire)
- Constructs a new bufgp, connecting each
Wire to the port whose name is given by the accompanying String parameter, with the initial String parameter as the instance name.
-
bufgp(Node, String, Wire, String, Wire)
- Constructs a new bufgp, connecting each
Wire to the port whose name is given by the accompanying String parameter.
-
bufgp(Node, String, Wire, Wire)
- Constructs a new bufgp, with the initial
String parameter as the instance name.
-
bufgp(Node, Wire, Wire)
- Constructs a new bufgp.
-
cellInterfaceDeterminesUniqueNetlistStructure()
-
-
main(String[])
-
-
propagate()
- Performs the asynchronous behavior of bufgp.
-
test()
-
-
type()
-
cellname
public static final String cellname
- The static cellname (netlist reference name) for bufgp
cell_interface
public static CellInterface cell_interface[]
- The port interface for bufgp:
i: in (1)
o: out (1)
bufgp
protected bufgp(Node parent)
- Used only by child classes to pass up the parent cell.
- Parameters:
- parent - Parent cell
bufgp
protected bufgp(Node parent,
String name)
- Used only by child classes to pass up the parent cell and instance name.
- Parameters:
- parent - Parent cell
- name - Instance name of the cell
bufgp
public bufgp(Node parent,
Wire i,
Wire o)
- Constructs a new bufgp.
- Parameters:
- parent - The parent
Cell to the bufgp
- i - The
Wire to be connected to input port i
- o - The
Wire to be connected to output port o
bufgp
public bufgp(Node parent,
String instanceName,
Wire i,
Wire o)
- Constructs a new bufgp, with the initial
String parameter as the instance name.
- Parameters:
- parent - The parent
Cell to the bufgp
- instanceName - The instance name of the bufgp
- i - The
Wire to be connected to input port i
- o - The
Wire to be connected to output port o
bufgp
public bufgp(Node parent,
String s0,
Wire w0,
String s1,
Wire w1)
- Constructs a new bufgp, connecting each
Wire to the port whose name is given by the accompanying String parameter.
- Parameters:
- parent - The parent
Cell to the bufgp
- s0 - The name of the port to which w0 will be connected
- w0 - The
Wire to be connected to the port specified by s0
- s1 - The name of the port to which w1 will be connected
- w1 - The
Wire to be connected to the port specified by s1
bufgp
public bufgp(Node parent,
String instanceName,
String s0,
Wire w0,
String s1,
Wire w1)
- Constructs a new bufgp, connecting each
Wire to the port whose name is given by the accompanying String parameter, with the initial String parameter as the instance name.
- Parameters:
- parent - The parent
Cell to the bufgp
- instanceName - The instance name of the bufgp
- s0 - The name of the port to which w0 will be connected
- w0 - The
Wire to be connected to the port specified by s0
- s1 - The name of the port to which w1 will be connected
- w1 - The
Wire to be connected to the port specified by s1
bufgp
public bufgp(Node parent,
ArgBlockList abl)
- Constructs a new bufgp, connecting its ports as given by the
String-Wire pairs in the ArgBlockList. Any generic assignments are made through String-String pairs in the ArgBlockList.
- Parameters:
- parent - The parent
Cell to the bufgp
- abl - The list of
String-Wire pairs for port assignments, and String-String pairs for generic assignments.
bufgp
public bufgp(Node parent,
String instanceName,
ArgBlockList abl)
- Constructs a new bufgp, connecting its ports as given by the
String-Wire pairs in the ArgBlockList, with the initial String parameter as the instance name. Any generic assignments are made through String-String pairs in the ArgBlockList.
- Parameters:
- parent - The parent
Cell to the bufgp
- instanceName - The instance name of the bufgp
- abl - The list of
String-Wire pairs for port assignments, and String-String pairs for generic assignments.
cellInterfaceDeterminesUniqueNetlistStructure
public final boolean cellInterfaceDeterminesUniqueNetlistStructure()
- Overrides:
- cellInterfaceDeterminesUniqueNetlistStructure in class CL
propagate
public final void propagate()
- Performs the asynchronous behavior of bufgp.
- Overrides:
- propagate in class CL
type
public int type()
main
public static void main(String argv[])
test
public static void test()
All Packages Class Hierarchy This Package Previous Next Index