All Packages  Class Hierarchy  This Package  Previous  Next  Index

Class byucc.jhdl.Xilinx.bufgp_ann

java.lang.Object
   |
   +----byucc.jhdl.base.Nameable
           |
           +----byucc.jhdl.base.Node
                   |
                   +----byucc.jhdl.base.Cell
                           |
                           +----byucc.jhdl.base.Annotation
                                   |
                                   +----byucc.jhdl.Xilinx.bufgp_ann

public final class bufgp_ann
extends Annotation
implements UnmappableCell, PreDefinedSchematic
Each of the BUF*_ANN classes implements an Annotation-only buffer, i.e. with no simulation model. This is to allow the user to set up net constraints that aren't supported natively by JHDL (i.e. clock net setup, etc.). The BUFG cell is a global buffer which distributes high-fanout clock signals throughout the device. For an XC4000 design, you can use a maximum of eight BUFG symbols (assuming that no specific BUFGP or BUFGS buffers are specified). The BUFG is converted to a BUFGP or BUFGS for the XC4000 architecture. The BUFGE is a global buffer that uses the 'early' routes on the device. The BUFGLS cell is a global buffer cell which distributes high-fanout signals throughout the device. The BUFGLS uses low-skew modes on the I/O buffers. The BUFGP is a primary global buffer. The BUFGS is a secondary global buffer. Both cells can drive any of four global vertical routes per column of CLBs. Each one of the four global vertical lines can drive the CLB clock (K) pin directly, and a small subset of the other CLB pins, depending on the type of buffer and the position (refer to the library guide). The JHDL XC4000 libraries model all of these cells as Annotations, meaning that they have no behavioral model. (Source: XACT Libraries Guide, pg. 3-87, Xilinx Corporation, 1994.)


Variable Index

 o cell_interface
The port interface for bufgp_ann: i: in (1) o: out (1)
 o cellname
The static cellname (netlist reference name) for bufgp_ann

Constructor Index

 o bufgp_ann(Node)
Used only by child classes to pass up the parent cell.
 o bufgp_ann(Node, ArgBlockList)
Constructs a new bufgp_ann, connecting its ports as given by the String-Wire pairs in the ArgBlockList.
 o bufgp_ann(Node, String)
Used only by child classes to pass up the parent cell and instance name.
 o bufgp_ann(Node, String, ArgBlockList)
Constructs a new bufgp_ann, connecting its ports as given by the String-Wire pairs in the ArgBlockList, with the initial String parameter as the instance name.
 o bufgp_ann(Node, String, String, Wire, String, Wire)
Constructs a new bufgp_ann, connecting each Wire to the port whose name is given by the accompanying String parameter, with the initial String parameter as the instance name.
 o bufgp_ann(Node, String, Wire, String, Wire)
Constructs a new bufgp_ann, connecting each Wire to the port whose name is given by the accompanying String parameter.
 o bufgp_ann(Node, String, Wire, Wire)
Constructs a new bufgp_ann, with the initial String parameter as the instance name.
 o bufgp_ann(Node, Wire, Wire)
Constructs a new bufgp_ann.

Method Index

 o cellInterfaceDeterminesUniqueNetlistStructure()
 o getCellName()
 o main(String[])
 o test()
 o type()

Variables

 o cellname
 public static final String cellname
The static cellname (netlist reference name) for bufgp_ann

 o cell_interface
 public static CellInterface cell_interface[]
The port interface for bufgp_ann: i: in (1) o: out (1)

Constructors

 o bufgp_ann
 protected bufgp_ann(Node parent)
Used only by child classes to pass up the parent cell.

Parameters:
parent - Parent cell
 o bufgp_ann
 protected bufgp_ann(Node parent,
                     String name)
Used only by child classes to pass up the parent cell and instance name.

Parameters:
parent - Parent cell
name - Instance name of the cell
 o bufgp_ann
 public bufgp_ann(Node parent,
                  Wire i,
                  Wire o)
Constructs a new bufgp_ann.

Parameters:
parent - The parent Cell to the bufgp_ann
i - The Wire to be connected to input port i
o - The Wire to be connected to output port o
 o bufgp_ann
 public bufgp_ann(Node parent,
                  String instanceName,
                  Wire i,
                  Wire o)
Constructs a new bufgp_ann, with the initial String parameter as the instance name.

Parameters:
parent - The parent Cell to the bufgp_ann
instanceName - The instance name of the bufgp_ann
i - The Wire to be connected to input port i
o - The Wire to be connected to output port o
 o bufgp_ann
 public bufgp_ann(Node parent,
                  String s0,
                  Wire w0,
                  String s1,
                  Wire w1)
Constructs a new bufgp_ann, connecting each Wire to the port whose name is given by the accompanying String parameter.

Parameters:
parent - The parent Cell to the bufgp_ann
s0 - The name of the port to which w0 will be connected
w0 - The Wire to be connected to the port specified by s0
s1 - The name of the port to which w1 will be connected
w1 - The Wire to be connected to the port specified by s1
 o bufgp_ann
 public bufgp_ann(Node parent,
                  String instanceName,
                  String s0,
                  Wire w0,
                  String s1,
                  Wire w1)
Constructs a new bufgp_ann, connecting each Wire to the port whose name is given by the accompanying String parameter, with the initial String parameter as the instance name.

Parameters:
parent - The parent Cell to the bufgp_ann
instanceName - The instance name of the bufgp_ann
s0 - The name of the port to which w0 will be connected
w0 - The Wire to be connected to the port specified by s0
s1 - The name of the port to which w1 will be connected
w1 - The Wire to be connected to the port specified by s1
 o bufgp_ann
 public bufgp_ann(Node parent,
                  ArgBlockList abl)
Constructs a new bufgp_ann, connecting its ports as given by the String-Wire pairs in the ArgBlockList. Any generic assignments are made through String-String pairs in the ArgBlockList.

Parameters:
parent - The parent Cell to the bufgp_ann
abl - The list of String-Wire pairs for port assignments, and String-String pairs for generic assignments.
 o bufgp_ann
 public bufgp_ann(Node parent,
                  String instanceName,
                  ArgBlockList abl)
Constructs a new bufgp_ann, connecting its ports as given by the String-Wire pairs in the ArgBlockList, with the initial String parameter as the instance name. Any generic assignments are made through String-String pairs in the ArgBlockList.

Parameters:
parent - The parent Cell to the bufgp_ann
instanceName - The instance name of the bufgp_ann
abl - The list of String-Wire pairs for port assignments, and String-String pairs for generic assignments.

Methods

 o cellInterfaceDeterminesUniqueNetlistStructure
 public final boolean cellInterfaceDeterminesUniqueNetlistStructure()
Overrides:
cellInterfaceDeterminesUniqueNetlistStructure in class Cell
 o type
 public int type()
 o getCellName
 public String getCellName()
Overrides:
getCellName in class Cell
 o main
 public static void main(String argv[])
 o test
 public static void test()

All Packages  Class Hierarchy  This Package  Previous  Next  Index